Relation between BCF2000, presets and Sysex files
Posted: January 27th, 2015, 3:17 pm
Hi,
I expand my knowledge of the BCF2000... So far, I was able to load the SYSEX file from this forum into the BCF2000 and configure FS as a working system.
First problem, I experienced: when I power off and turn the BCF2000 again on, it doesn't work anymore and I have to reload again the SYSEX file to the controller. Why?
I already read several time you may not use Preset 0 to upload but no idea how you can select which Preset you use. This brings me to the next point:
I played with BC Edit to change the standard FS SYSEX file. I am able to change things but I want to use the presets on the BCF2000 to have several 'modes' of functionality.
For example an edit mode (Preset 1) to program FS (for ex: fader 1: R, fader 2: G, fader 3: B, and so on)
A 'run' mode (Preset 2) where fader 1 is master-output, fader 2: speed, and so on
I can only load 1 SYSEX file into the BCF2000. Is this a normal behaviour?
Does the SYSEX file itself contains a Preset number for the BCF2000 or is it important, and how, to upload the several SYSEX files?
Thanks to clarify if you can help me
I expand my knowledge of the BCF2000... So far, I was able to load the SYSEX file from this forum into the BCF2000 and configure FS as a working system.
First problem, I experienced: when I power off and turn the BCF2000 again on, it doesn't work anymore and I have to reload again the SYSEX file to the controller. Why?
I already read several time you may not use Preset 0 to upload but no idea how you can select which Preset you use. This brings me to the next point:
I played with BC Edit to change the standard FS SYSEX file. I am able to change things but I want to use the presets on the BCF2000 to have several 'modes' of functionality.
For example an edit mode (Preset 1) to program FS (for ex: fader 1: R, fader 2: G, fader 3: B, and so on)
A 'run' mode (Preset 2) where fader 1 is master-output, fader 2: speed, and so on
I can only load 1 SYSEX file into the BCF2000. Is this a normal behaviour?
Does the SYSEX file itself contains a Preset number for the BCF2000 or is it important, and how, to upload the several SYSEX files?
Thanks to clarify if you can help me