Hi there,
I'm new to DMX but I have managed to get my ADJ Comscans and my ADJ Tri Par Profiles working with Freestyler. The Fixture Creation is still a bit lost on me and I tried an existing file for the Kam Par Bar which I found on here but nothing is happening.
Can anyone suggest what I am doing wrong and if there is a file for the Par Bar Mk III.
Thanks
Adam
Kam Par Bar Mk III [SOLVED] Topic is solved
Forum rules
A place for you to request fixture files to be created by other users - PLEASE BE WARNED THIS MAY NEVER HAPPEN AS WE ENCOURAGE YOU TO TRY YOURSELF AND WILL GIVE PROMPTS as and when we can. at the END OF THE DAY Creating fixtures isn't easy if we don't have that particular light and an appropriate manual! BE WARNED!
IF YOU HAVE HAD A REQUEST FULFILLED PLEASE MARK THE TOPIC AS SOLVED!
You can now pay for fixtures if you don't want to wait or create your own by going to here http://www.freestylersupport.com/wiki/f ... on_service
A place for you to request fixture files to be created by other users - PLEASE BE WARNED THIS MAY NEVER HAPPEN AS WE ENCOURAGE YOU TO TRY YOURSELF AND WILL GIVE PROMPTS as and when we can. at the END OF THE DAY Creating fixtures isn't easy if we don't have that particular light and an appropriate manual! BE WARNED!
IF YOU HAVE HAD A REQUEST FULFILLED PLEASE MARK THE TOPIC AS SOLVED!
You can now pay for fixtures if you don't want to wait or create your own by going to here http://www.freestylersupport.com/wiki/f ... on_service
-
- Knows how to turn Lights ON
- Posts: 3
- Joined: May 10th, 2012, 9:19 am
-
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: January 4th, 2011, 9:57 pm
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Kam Par Bar Mk III
If abesoutely nothing happens then it is most likely an addressing issue.
Be sure that the address is correct and if there are a mode then also check that thw mode is set correct.
Also note you can use the slider panel in right side of FreeStyler to direct control the fixture.
With a user manual and the sliders then you should be able to turn on light.
/Jan
Be sure that the address is correct and if there are a mode then also check that thw mode is set correct.
Also note you can use the slider panel in right side of FreeStyler to direct control the fixture.
With a user manual and the sliders then you should be able to turn on light.
/Jan
-
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: January 4th, 2011, 9:57 pm
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Kam Par Bar Mk III
You do not have the required permissions to view the files attached to this post.
-
- Knows how to turn Lights ON
- Posts: 3
- Joined: May 10th, 2012, 9:19 am
Re: Kam Par Bar Mk III
Ok that's great thanks
-
- Knows how to turn Lights ON
- Posts: 3
- Joined: May 10th, 2012, 9:19 am
Re: Kam Par Bar Mk III
Jan you are a star! Working perfectly now, nice one!!
-
- Knows how to turn Lights ON
- Posts: 1
- Joined: February 17th, 2015, 6:49 pm
- FreeStyler Version: x2
- I Use FreeStyler for: Band
Re: Kam Par Bar Mk III
Just downloaded this myself & now my bar is working too, thanks
-
- Knows how to turn Lights ON
- Posts: 3
- Joined: July 10th, 2015, 8:37 am
- FreeStyler Version: 3.5.7
- I Use FreeStyler for: Band
Re: Kam Par Bar Mk III [SOLVED]
Is this similar to the Kam Partybar? I could do with a fixture for that and the Kam LED Par 56, cheers