Hello everybody,
I bought an ENTTEC open DMX Interface and some light:
2 Stairville LED PAR 64 and 56
1 Stairville LED BAR 252
I was really looking forward to get step by step into lighning.
I downloaded FreeStyler and did everything (I think) right:
Connected the can with the PC:
Setup: I have choosen my Interface
Add fixtures: Stairville LED PAR 56
And tada:
no light....
Since I´m using a Mac (Parallels) I thought that it`s maybe do to compability or something like that.
That`s why i downloaded LUMIDMX (trial) first of all everything was dark to but when I set the faders 1-7 to max I can control light as i wanted.
I`m really sorry, I´sure it`s just a dumb mistake but what do I wrong?
I have set the dimmer (in the right window, the one that "drives in" from the right side when you click on it dimmer, red, blue, et.) on all values
I would be so thankfull if somebody could help me.
Best wishes
Marc
Ì can`t see light :)
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
redoxchaos
- Knows how to turn Lights ON
- Posts: 1
- Joined: November 6th, 2011, 4:33 pm
- FreeStyler Version: 3