hello
another light i'm trying to work out the fixture for... (Miltec) MTC 250 Wash
i just can't seem t get the shutter/strobe settings right. if anyone could take a look at the attached .pff file and let me know where i'm going wrong it would be greatly appreciated
thanks in advance
m
p.s.i got the following info from Miltec (http://www.miltec.org.uk) should it be needed
CHANNEL 1
COLOUR WHEEL
0-16 open
17-33 red
34-50 yellow
51-67 purple
68-84 green
85-101 orange
102-118 blue (dark)
119-135 pink
136-255 scroll
slow-fast
CHANNEL 2
STROBE
0-14closed
15-29 open
30-250 strobe
slow fast
251-255 open
CHANNEL 3
DIMMER
0 closed
255 open
gets brighter
Fixture Help - (Miltec) MTC-250 Wash
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
- Starting to get to grips with FreeStyler
- Posts: 28
- Joined: January 5th, 2010, 5:12 pm
- FreeStyler Version: 3.2.1
- I Use FreeStyler for: Nightclub Lighting
- Twitter: twitter.com/
Fixture Help - (Miltec) MTC-250 Wash
You do not have the required permissions to view the files attached to this post.
-
- Starting to get to grips with FreeStyler
- Posts: 28
- Joined: January 5th, 2010, 5:12 pm
- FreeStyler Version: 3.2.1
- I Use FreeStyler for: Nightclub Lighting
- Twitter: twitter.com/
Re: Fixture Help - (Miltec) MTC-250 Wash
hi onge
thanks very much for this.
the shutter/strobe channel were the wrong way round with the intensity, i've changed these settings and it is now working 100% after testing
.pff file attached to this post and also a post also created in 'user created downloads'
thanks again
m
thanks very much for this.
the shutter/strobe channel were the wrong way round with the intensity, i've changed these settings and it is now working 100% after testing
.pff file attached to this post and also a post also created in 'user created downloads'
thanks again
m
You do not have the required permissions to view the files attached to this post.