Problem strobe MacMah S1500D
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
- Just started using FS
- Posts: 11
- Joined: March 11th, 2010, 2:57 pm
- FreeStyler Version: 3.2.8
- Twitter: twitter.com/
Problem strobe MacMah S1500D
Hi to all!
I have a little problem with my new strobe is a MacMah S1500D.
It is very good, but the only problem is that I can not have control via DMX by FS. I try to create a fixture, but nothing changes, my strobe remains silent to my call.
If someone had an idea where the problem comes ...
I joined my record and file. Pff
Thank you in advance!
PS: If I could have answered quickly, his would simpa because I have a party tomorrow and I wanted to test it by DMX! Anyway if this is not the case, do not worry!
I have a little problem with my new strobe is a MacMah S1500D.
It is very good, but the only problem is that I can not have control via DMX by FS. I try to create a fixture, but nothing changes, my strobe remains silent to my call.
If someone had an idea where the problem comes ...
I joined my record and file. Pff
Thank you in advance!
PS: If I could have answered quickly, his would simpa because I have a party tomorrow and I wanted to test it by DMX! Anyway if this is not the case, do not worry!
You do not have the required permissions to view the files attached to this post.
- LJ_krede.dk
- Moderator
- Posts: 1028
- Joined: October 29th, 2007, 8:01 pm
- FreeStyler Version: 3.3.7
- I Use FreeStyler for: Where do I start?
Re: Problem strobe MacMah S1500D
the fixture looks alright.. however the shutter channel is named Gobo1. this shouldn't effect the functions thou.
you have to make sure you have set the addresses correctly in Freestyler and on the strobe. try to set the address to 1, set dip switch 1 on the fixture to on, and set the rest to off. also set the address to 1 in freestyler. now it should work.
if not, can you control other of your lamps with Freestyler?
you have to make sure you have set the addresses correctly in Freestyler and on the strobe. try to set the address to 1, set dip switch 1 on the fixture to on, and set the rest to off. also set the address to 1 in freestyler. now it should work.
if not, can you control other of your lamps with Freestyler?
/LJ_krede.dk
Aalborg, Denmark
Moderator, Supporter and Bug report manager for the FreeStyler community
Found a bug? Submit a Bug Report
Aalborg, Denmark
Moderator, Supporter and Bug report manager for the FreeStyler community
Found a bug? Submit a Bug Report
-
- Just started using FS
- Posts: 11
- Joined: March 11th, 2010, 2:57 pm
- FreeStyler Version: 3.2.8
- Twitter: twitter.com/
Re: Problem strobe MacMah S1500D
Thank you, I finally get a handle, a little, the signal ...
I explain, I did what you said, put the strobe has the address 1 and delete the channel Gobo1. At that time still nothing ... I test something else and give all the dip switch on and off the strobe that sets out by DMX ... weird ... all my dip switch is on off and works ...
One problem to resolve but another appears, I do not manage the intensity of light and yet the improvement ... I can not put that light at max or mini!
Can also adjust the speed of flash.
How can I fix this??
Is my fixture in Fixture créator was well set at "strobe" and "intensity channel??
Thank you in advance!
PS: Sorry if my English, not terrible, but I'm French!
I explain, I did what you said, put the strobe has the address 1 and delete the channel Gobo1. At that time still nothing ... I test something else and give all the dip switch on and off the strobe that sets out by DMX ... weird ... all my dip switch is on off and works ...
One problem to resolve but another appears, I do not manage the intensity of light and yet the improvement ... I can not put that light at max or mini!
Can also adjust the speed of flash.
How can I fix this??
Is my fixture in Fixture créator was well set at "strobe" and "intensity channel??
Thank you in advance!
PS: Sorry if my English, not terrible, but I'm French!
- dmxlighting
- FS is my life
- Posts: 1025
- Joined: August 11th, 2008, 11:46 pm
- FreeStyler Version: beta
- I Use FreeStyler for: Where do I start?
Re: Problem strobe MacMah S1500D
A couple of things...
First you could probably use a showtec Jumbo Strobe profile - this is already in the list. I use it with my very similar strobe and it all works just fine.
Secondly - if your strobe is anything like mine - dont use it above channel 200 as it may not work - This is true of my strobe.
First you could probably use a showtec Jumbo Strobe profile - this is already in the list. I use it with my very similar strobe and it all works just fine.
Secondly - if your strobe is anything like mine - dont use it above channel 200 as it may not work - This is true of my strobe.
Freestyler DMX - Pissing over the competition since 199x
What do you want for free ?
Freelance Lighting Programmer / Sound Engineer / Designer / Installer and General All Round AV Expert
What do you want for free ?
Freelance Lighting Programmer / Sound Engineer / Designer / Installer and General All Round AV Expert
Re: Problem strobe MacMah S1500D
You could also use the Stairville Strobe 1500 DMX fixture.
As dmxlighting said, ensure that you have dipswitch 1 on and the rest off. Patch the fixture to address 1 in FreeStyler.
Select the fixture, move fader 2 (Intensity) to full on. Then move slider 1 to adjust speed of flash rate, can use gobo wheel 1 if you patched the above fixture or use the strobe control.
Remember dipswitches might not be "up" for "on" and "down" for "off". Some dispswitches have "on" marked others might just have a "1" meaning on.
As dmxlighting said, ensure that you have dipswitch 1 on and the rest off. Patch the fixture to address 1 in FreeStyler.
Select the fixture, move fader 2 (Intensity) to full on. Then move slider 1 to adjust speed of flash rate, can use gobo wheel 1 if you patched the above fixture or use the strobe control.
Remember dipswitches might not be "up" for "on" and "down" for "off". Some dispswitches have "on" marked others might just have a "1" meaning on.
-
- Starting to get to grips with FreeStyler
- Posts: 24
- Joined: February 15th, 2010, 4:26 pm
- FreeStyler Version: 3.3.1
Re: Problem strobe MacMah S1500D
Also make sure that you power off/power on after changing DMX address. It sometimes may be required by the hardware which is not able to read the switches while running (only at startup)
-
- Just started using FS
- Posts: 11
- Joined: March 11th, 2010, 2:57 pm
- FreeStyler Version: 3.2.8
- Twitter: twitter.com/
Re: Problem strobe MacMah S1500D
Merci pour les réponses et désolé de répondre si tard!!!
Pour le strobe, J'arrive a régler l'intensité lumineuse sur quelques points. Je ne peux pas gérer la lumière progressivement avec la vitesse. C'est soit lumière très forte, avec vitesse semi rapide, soit lumière très faible, avec vitesse lente...
En plus, la vitesse du strobe ne peut atteindre son maximum.
Pourquoi ça ne fonctionne toujours pas. Un strobe ça doit être la chose la plus simple a configurer, je pense normalement.
Pour le strobe, J'arrive a régler l'intensité lumineuse sur quelques points. Je ne peux pas gérer la lumière progressivement avec la vitesse. C'est soit lumière très forte, avec vitesse semi rapide, soit lumière très faible, avec vitesse lente...
En plus, la vitesse du strobe ne peut atteindre son maximum.
Pourquoi ça ne fonctionne toujours pas. Un strobe ça doit être la chose la plus simple a configurer, je pense normalement.
- dmxlighting
- FS is my life
- Posts: 1025
- Joined: August 11th, 2008, 11:46 pm
- FreeStyler Version: beta
- I Use FreeStyler for: Where do I start?
Re: Problem strobe MacMah S1500D
Un flash est normalement très facile à configurer comme il l'a normalement que deux canaux.LJ sunlight wrote:Merci pour les réponses et désolé de répondre si tard!!!
Pour le strobe, J'arrive a régler l'intensité lumineuse sur quelques points. Je ne peux pas gérer la lumière progressivement avec la vitesse. C'est soit lumière très forte, avec vitesse semi rapide, soit lumière très faible, avec vitesse lente...
En plus, la vitesse du strobe ne peut atteindre son maximum.
Pourquoi ça ne fonctionne toujours pas. Un strobe ça doit être la chose la plus simple a configurer, je pense normalement.
La vitesse et l'intensité.
Je me demande s'il ya un problème avec votre flash. Connaissez-vous quelqu'un qui peut tester le flash avec DMX? C'est une bonne idée de faire cela si vous le pouvez.
S'il vous plaît laissez-moi connaître le résultat de l'essai.
Lee
Désolé pour mon mauvais français - je suis anglais!
Freestyler DMX - Pissing over the competition since 199x
What do you want for free ?
Freelance Lighting Programmer / Sound Engineer / Designer / Installer and General All Round AV Expert
What do you want for free ?
Freelance Lighting Programmer / Sound Engineer / Designer / Installer and General All Round AV Expert
-
- Starting to get to grips with FreeStyler
- Posts: 24
- Joined: February 15th, 2010, 4:26 pm
- FreeStyler Version: 3.3.1
Re: Problem strobe MacMah S1500D
LJ, tu es d'où ? Je suis sur Nantes, si je peux te filer un coup de main....LJ sunlight wrote:Merci pour les réponses et désolé de répondre si tard!!!
Pour le strobe, J'arrive a régler l'intensité lumineuse sur quelques points. Je ne peux pas gérer la lumière progressivement avec la vitesse. C'est soit lumière très forte, avec vitesse semi rapide, soit lumière très faible, avec vitesse lente...
En plus, la vitesse du strobe ne peut atteindre son maximum.
Pourquoi ça ne fonctionne toujours pas. Un strobe ça doit être la chose la plus simple a configurer, je pense normalement.
- remco_k
- Moderator
- Posts: 1233
- Joined: October 12th, 2008, 11:27 pm
- FreeStyler Version: N/A
- I Use FreeStyler for: To help others here on the Forum!
Re: Problem strobe MacMah S1500D
I just lost you all...
Developer of the Sound 2 Light application (SL.exe) for FreeStyler: https://www.digiplay.nl/fs
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl
Re: Problem strobe MacMah S1500D
We are all still here ... Your just not looking in the right places.remco_k wrote:I just lost you all...
Tell me this, when you loose something, you search high and low for it and where do you find it ? The last place you look, so why not look there first ?
- remco_k
- Moderator
- Posts: 1233
- Joined: October 12th, 2008, 11:27 pm
- FreeStyler Version: N/A
- I Use FreeStyler for: To help others here on the Forum!
Re: Problem strobe MacMah S1500D
I ask my wife. She has all the answers.Onge wrote: ...Tell me this, when you loose something, ....
Developer of the Sound 2 Light application (SL.exe) for FreeStyler: https://www.digiplay.nl/fs
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl
-
- Just started using FS
- Posts: 11
- Joined: March 11th, 2010, 2:57 pm
- FreeStyler Version: 3.2.8
- Twitter: twitter.com/
Re: Problem strobe MacMah S1500D
Bin, je suis pas bien loin je suis a Cholet!!!Hanternoz wrote: LJ, tu es d'où ? Je suis sur Nantes, si je peux te filer un coup de main....
Pas grave, j'avais oublié de traduire!!!dmxlighting wrote:Désolé pour mon mauvais français - je suis anglais!
- dmxlighting
- FS is my life
- Posts: 1025
- Joined: August 11th, 2008, 11:46 pm
- FreeStyler Version: beta
- I Use FreeStyler for: Where do I start?
Re: Problem strobe MacMah S1500D
Cause this would still be the last place too - You can't win!Onge wrote: Tell me this, when you loose something, you search high and low for it and where do you find it ? The last place you look, so why not look there first ?
Hmm yours too ? Mine is like thatremco_k wrote: I ask my wife. She has all the answers.
Freestyler DMX - Pissing over the competition since 199x
What do you want for free ?
Freelance Lighting Programmer / Sound Engineer / Designer / Installer and General All Round AV Expert
What do you want for free ?
Freelance Lighting Programmer / Sound Engineer / Designer / Installer and General All Round AV Expert
-
- Starting to get to grips with FreeStyler
- Posts: 24
- Joined: February 15th, 2010, 4:26 pm
- FreeStyler Version: 3.3.1
Re: Problem strobe MacMah S1500D
Bin, je suis pas bien loin je suis a Cholet!!!LJ sunlight wrote:Hanternoz wrote: LJ, tu es d'où ? Je suis sur Nantes, si je peux te filer un coup de main....
So if you would like some support, feel free to ask and we will organize ourselves
I have mine wroking OK with Freestyler. We will then be able to make cross tests.
Staying at your disposal
-
- Just started using FS
- Posts: 11
- Joined: March 11th, 2010, 2:57 pm
- FreeStyler Version: 3.2.8
- Twitter: twitter.com/
Re: Problem strobe MacMah S1500D
Sans problème, sa serait cool, tu pourrait m'apprendre des truc sur freestyler!!!Hanternoz wrote: So if you would like some support, feel free to ask and we will organize ourselves
I have mine wroking OK with Freestyler. We will then be able to make cross tests.
Staying at your disposal
Si tu veux je te donne mon adresse MSN...