Hello,
I have created a fixture with only 3 chanels for R G B and it works great with a color line over the fixture wich change on the R G B values. Is it possible to have a square with the color and not a line?
Claude
Color line over fixture image
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
- Starting to get to grips with FreeStyler
- Posts: 16
- Joined: November 19th, 2009, 2:48 pm
- FreeStyler Version: 3.2.1
- Twitter: twitter.com/
- remco_k
- Moderator
- Posts: 1233
- Joined: October 12th, 2008, 11:27 pm
- FreeStyler Version: N/A
- I Use FreeStyler for: To help others here on the Forum!
Re: Color line over fixture image
Never searched for it. I think there is no option for that.
Developer of the Sound 2 Light application (SL.exe) for FreeStyler: https://www.digiplay.nl/fs
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl
-
- Starting to get to grips with FreeStyler
- Posts: 16
- Joined: November 19th, 2009, 2:48 pm
- FreeStyler Version: 3.2.1
- Twitter: twitter.com/
Re: Color line over fixture image
Hi remco_k,
Many thanks for your answer.
Claude
Many thanks for your answer.
Claude
- LJ_krede.dk
- Moderator
- Posts: 1028
- Joined: October 29th, 2007, 8:01 pm
- FreeStyler Version: 3.3.7
- I Use FreeStyler for: Where do I start?
Re: Color line over fixture image
The colorline (red on picture) is shown when the fixture uses RGB or CMY color mixing
if you have a colorwheel (or have made colorwheel settings for your fixture. some RGB fixtures has a channel with color presets) you see a square (yellow on picture) at your fixture.
in this case my fixture has two gobo wheels which is also shown at the fixture. (gobowheel 1 is open, gobowheel 2 is beam splitter)
OBS: it is for demonstration only that I have selected a color at the CMY and Colorwheel channels at the same time. it is not a thing I would normally do.
if you have a colorwheel (or have made colorwheel settings for your fixture. some RGB fixtures has a channel with color presets) you see a square (yellow on picture) at your fixture.
in this case my fixture has two gobo wheels which is also shown at the fixture. (gobowheel 1 is open, gobowheel 2 is beam splitter)
OBS: it is for demonstration only that I have selected a color at the CMY and Colorwheel channels at the same time. it is not a thing I would normally do.
You do not have the required permissions to view the files attached to this post.
Last edited by LJ_krede.dk on January 16th, 2010, 1:39 pm, edited 2 times in total.
/LJ_krede.dk
Aalborg, Denmark
Moderator, Supporter and Bug report manager for the FreeStyler community
Found a bug? Submit a Bug Report
Aalborg, Denmark
Moderator, Supporter and Bug report manager for the FreeStyler community
Found a bug? Submit a Bug Report
-
- Starting to get to grips with FreeStyler
- Posts: 16
- Joined: November 19th, 2009, 2:48 pm
- FreeStyler Version: 3.2.1
- Twitter: twitter.com/
Re: Color line over fixture image
Hi LJ_krede.dk
Thanks for the example. My device is a leds panel so I have only the colorline and sometimes the color is a bit difficult to see correctly.
But it is OK freestyler has so many features, that I always want one more
Claude
Thanks for the example. My device is a leds panel so I have only the colorline and sometimes the color is a bit difficult to see correctly.
But it is OK freestyler has so many features, that I always want one more
Claude