Hello everyone!
I have a HQ Power VDP1500 SM3 (FOG MACHINE), and i can't use it with the Freestyler...
I'm using the 1 DMX channel to use it... And with a DMX Controller i can use it and the fog it's ok...
But with the freestyler, i've already created a fixture with one channel only, with 0 to 255, but does work... I've used the FOG Controler and even selecting the fixture and go the channel 1 and sliding it from 0 to 255... and nothing... Did anyone had the same problem?
Thank you
Problem with Fog Machine
-
- Knows how to turn Lights ON
- Posts: 1
- Joined: April 9th, 2015, 6:35 am
- FreeStyler Version: 3.6.4
- I Use FreeStyler for: Stage Show
-
- Moderator
- Posts: 948
- Joined: September 18th, 2012, 9:32 pm
- FreeStyler Version: None
- I Use FreeStyler for: To help others here on the Forum!
Re: Problem with Fog Machine
Hi
It could be a 2 channel Fog machine? Be sure to check the manual and double check, but it's known that some are 1 channel and others are 2 channel.
It could be a 2 channel Fog machine? Be sure to check the manual and double check, but it's known that some are 1 channel and others are 2 channel.