I have a scorpion sky that I would like to prgram to do a liquid sky and tunnel effect. Can someone help with the valves I would use or steps? This is for a Halloween display.
Thanks,
Eric
Scorpion Sky Liquid Sky Help
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
- Knows how to turn Lights ON
- Posts: 3
- Joined: September 26th, 2011, 3:20 am
- FreeStyler Version: 3.4.4
- dmxlighting
- FS is my life
- Posts: 1025
- Joined: August 11th, 2008, 11:46 pm
- FreeStyler Version: beta
- I Use FreeStyler for: Where do I start?
Re: Scorpion Sky Liquid Sky Help
Assuming that the fixture can do what you want you will need to post a list of the fixtures atributes (this will be in the user manual). Aside from that once you have the required info Im sure you can put the values into FS yourself ?
Freestyler DMX - Pissing over the competition since 199x
What do you want for free ?
Freelance Lighting Programmer / Sound Engineer / Designer / Installer and General All Round AV Expert
What do you want for free ?
Freelance Lighting Programmer / Sound Engineer / Designer / Installer and General All Round AV Expert
-
- Knows how to turn Lights ON
- Posts: 3
- Joined: September 26th, 2011, 3:20 am
- FreeStyler Version: 3.4.4
Re: Scorpion Sky Liquid Sky Help
That is just it the manual sucks.
http://www.chauvetlighting.com/scorpion-sky.html
I am assumeing that you just do a horizontal line then pan it up or down for a liquid sky.
Not sure how to the the tunnel/vortex.
http://www.chauvetlighting.com/scorpion-sky.html
I am assumeing that you just do a horizontal line then pan it up or down for a liquid sky.
Not sure how to the the tunnel/vortex.
- dmxlighting
- FS is my life
- Posts: 1025
- Joined: August 11th, 2008, 11:46 pm
- FreeStyler Version: beta
- I Use FreeStyler for: Where do I start?
Re: Scorpion Sky Liquid Sky Help
For some reason I cant get the manual off the site. If you can please post it here and I'll have a look.
You should know that programming a Laser is a bloody nightmare as there are normally loads and loads of channels to do all the clever tricks.. My pet hate is programming lasers! Although I HAVE to do it more and more these days as they are so affordable now and more of my clients want to buy them.
You should know that programming a Laser is a bloody nightmare as there are normally loads and loads of channels to do all the clever tricks.. My pet hate is programming lasers! Although I HAVE to do it more and more these days as they are so affordable now and more of my clients want to buy them.
Freestyler DMX - Pissing over the competition since 199x
What do you want for free ?
Freelance Lighting Programmer / Sound Engineer / Designer / Installer and General All Round AV Expert
What do you want for free ?
Freelance Lighting Programmer / Sound Engineer / Designer / Installer and General All Round AV Expert
- Spirit
- Pro Supporter! (Moderator)
- Posts: 1421
- Joined: July 10th, 2010, 8:55 pm
- FreeStyler Version: 3.5.9
- I Use FreeStyler for: Nightclub Lighting
Re: Scorpion Sky Liquid Sky Help
Oke i have taken a look and in de PDF there aren't any Pictures of the Paterns.
But you need to Scroll thru the Pattern Channels in Search voor the Fortex/Tunnel/Blackhole
This should be Channel 2
and The pattern Should look like a Circle
But you need to Scroll thru the Pattern Channels in Search voor the Fortex/Tunnel/Blackhole
This should be Channel 2
and The pattern Should look like a Circle
AMD FX-6100 (3.6ghz)x6, Nvidia 770GTX 4GB, 8GB Ram,ROG MB, enttec Pro, Open enttec, Velleman, T2250MTS-B1 22"touchscreen, Ilyama 23" screen, scans, dimm, rgbled, laser, soundsystem Just a drive-in show. Live and Dance
-
- Knows how to turn Lights ON
- Posts: 3
- Joined: September 26th, 2011, 3:20 am
- FreeStyler Version: 3.4.4
Re: Scorpion Sky Liquid Sky Help
Yes, it say channel 2 is the pattern channel and says values 1-35 are the patterns. The fixture file I downloaded from here uses different pattern #'s. I guess I will have to play with that tonight when I get home.
Is there an easy way to increase the chanel 2 value by one. Would I just change that in the fixture editor??
Nevermide I just found out Ctrl + and - work.
Is there an easy way to increase the chanel 2 value by one. Would I just change that in the fixture editor??
Nevermide I just found out Ctrl + and - work.
- Spirit
- Pro Supporter! (Moderator)
- Posts: 1421
- Joined: July 10th, 2010, 8:55 pm
- FreeStyler Version: 3.5.9
- I Use FreeStyler for: Nightclub Lighting
Re: Scorpion Sky Liquid Sky Help
Yes there is.
You need to First select a Fixture Channels on the Right side sliders.
So in your case you need to Press one time on the Pattern channel with the mouse.
and now you can Increase +1 with the "+" Button On the Numpad ( THis only seems to work with the NUMPAD!)
And Decrase -1 with the "-" Button on the NUMPAD.
/spirit
You need to First select a Fixture Channels on the Right side sliders.
So in your case you need to Press one time on the Pattern channel with the mouse.
and now you can Increase +1 with the "+" Button On the Numpad ( THis only seems to work with the NUMPAD!)
And Decrase -1 with the "-" Button on the NUMPAD.
/spirit
AMD FX-6100 (3.6ghz)x6, Nvidia 770GTX 4GB, 8GB Ram,ROG MB, enttec Pro, Open enttec, Velleman, T2250MTS-B1 22"touchscreen, Ilyama 23" screen, scans, dimm, rgbled, laser, soundsystem Just a drive-in show. Live and Dance