Could i set the BCD2000 up to do the following?
Blue = submaster control
red = override button control
pink = open/close window
green = general
Im sure the buttons can work well - but would the go/back for scrolling through the submaster sequenced.
And could i get the faders to control cue speed - and to change from cue 1-5 to 6-10 when i go through the sub pages?
How would i go about programming it to do this?
Thanks
Could i do this? how?
-
- Starting to get to grips with FreeStyler
- Posts: 17
- Joined: August 23rd, 2010, 5:43 pm
- I Use FreeStyler for: Stage Show
Could i do this? how?
You do not have the required permissions to view the files attached to this post.
- LJ_krede.dk
- Moderator
- Posts: 1028
- Joined: October 29th, 2007, 8:01 pm
- FreeStyler Version: 3.3.7
- I Use FreeStyler for: Where do I start?
Re: Could i do this? how?
yes, it is doable but there is a but!!!
1) you need the MIDIOX and midi yoke programs on you computer
2) You need to configure MIDIOX and your BCF
3) it take many hours to get nit work
I'm on work right now, but i have posted in another topic about how configure BCF and MIDIOX to do some stuff, similar to what you ask for.. Look at my posts and take a look
If you need more help, I will be happy to assist you
1) you need the MIDIOX and midi yoke programs on you computer
2) You need to configure MIDIOX and your BCF
3) it take many hours to get nit work
I'm on work right now, but i have posted in another topic about how configure BCF and MIDIOX to do some stuff, similar to what you ask for.. Look at my posts and take a look
If you need more help, I will be happy to assist you
/LJ_krede.dk
Aalborg, Denmark
Moderator, Supporter and Bug report manager for the FreeStyler community
Found a bug? Submit a Bug Report
Aalborg, Denmark
Moderator, Supporter and Bug report manager for the FreeStyler community
Found a bug? Submit a Bug Report
-
- Starting to get to grips with FreeStyler
- Posts: 17
- Joined: August 23rd, 2010, 5:43 pm
- I Use FreeStyler for: Stage Show
Re: Could i do this? how?
Found this:
http://www.freestylersupport.com/fsforu ... =16&t=2189
all i have to do is upload to BCF and change the config in freestyler
http://www.freestylersupport.com/fsforu ... =16&t=2189
all i have to do is upload to BCF and change the config in freestyler
- LJ_krede.dk
- Moderator
- Posts: 1028
- Joined: October 29th, 2007, 8:01 pm
- FreeStyler Version: 3.3.7
- I Use FreeStyler for: Where do I start?
Re: Could i do this? how?
some comments to your picture...
you only have one tap sync button in Freestyler
you can't use the encoders to back and go unless you use a program like MIDIOX. I got it working but don't use it because it was lacking and not very reliable.
you only have one tap sync button in Freestyler
you can't use the encoders to back and go unless you use a program like MIDIOX. I got it working but don't use it because it was lacking and not very reliable.
you can use MIDIOX for this using MIDI data mapping and Program change mappingAnd could i get the faders to control cue speed - and to change from cue 1-5 to 6-10 when i go through the sub pages?
/LJ_krede.dk
Aalborg, Denmark
Moderator, Supporter and Bug report manager for the FreeStyler community
Found a bug? Submit a Bug Report
Aalborg, Denmark
Moderator, Supporter and Bug report manager for the FreeStyler community
Found a bug? Submit a Bug Report