That's why I put the final tested lasers there in user created fixtures section. Hope that was right thing to do.
I only made one for chauvet radius 2.0 (with graphics, etc) so there was no updated or final version as from the one marked as draft/untested reportedly worked perfectly off the bat without issue so I never needed to change anything. That's why I wasn't sure as that one was technically already uploaded. Plus I wasn't sure whether you did finish/test a better one? Or stopped working on it after the issues? (Not sure anyone would blame you)
Chauvet Radius 2.0 Profile?
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
- FS is my life
- Posts: 253
- Joined: April 9th, 2012, 10:27 pm
- FreeStyler Version: 3.5.7
- I Use FreeStyler for: DJ
- Contact:
- djSupport
- Hosts the Freestyler Forum and is an Admin!
- Posts: 1902
- Joined: July 9th, 2007, 6:57 pm
- FreeStyler Version: Forum la
- I Use FreeStyler for: Just for the Fun of it.
- Contact:
Re: Chauvet Radius 2.0 Profile?
my versions are attached to my post further up
Heather Trott, You Babe! I Drive a Dacia Duster and Explore! Check it out
-
- FS is my life
- Posts: 253
- Joined: April 9th, 2012, 10:27 pm
- FreeStyler Version: 3.5.7
- I Use FreeStyler for: DJ
- Contact:
Re: Chauvet Radius 2.0 Profile?
I don't imagine there's gunna be a massive difference either way, mine was confirmed working. But I would also bet on yours working perfectly too since your more experienced than I am at this fixture lark! Though when I get back to my pc I may just take a look see in case you did anything different (for my own learning).
- djSupport
- Hosts the Freestyler Forum and is an Admin!
- Posts: 1902
- Joined: July 9th, 2007, 6:57 pm
- FreeStyler Version: Forum la
- I Use FreeStyler for: Just for the Fun of it.
- Contact:
Re: Chauvet Radius 2.0 Profile?
I didn't use the P/T way you mentioned because I'd have to explain that and I know from experience if they cant build profiles they wont get that so I use macros just to raise the sliders up and down in increments,,,
Heather Trott, You Babe! I Drive a Dacia Duster and Explore! Check it out
-
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: January 4th, 2011, 9:57 pm
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Chauvet Radius 2.0 Profile?
Hej folks
Just for the fun of it and to say that more complex fixtures time increase dramatically then I have made one of the laser fixtures.
I have used round 10 hours.
Entering values and figuring out what controls I want to have where and so on takes time but creating new icons and patterns that is a killer. (I was lucky to find most of the patterns)
To support "djSupport". It takes time even just to enter the dmx values. It may look like a lousy fixture if the images are not correct but I don't think anyone will pay for 10 - 20 hours work just to get patterns correct.
And to inspire you two have a look on my solution for the laser.
/Jan
Just for the fun of it and to say that more complex fixtures time increase dramatically then I have made one of the laser fixtures.
I have used round 10 hours.
Entering values and figuring out what controls I want to have where and so on takes time but creating new icons and patterns that is a killer. (I was lucky to find most of the patterns)
To support "djSupport". It takes time even just to enter the dmx values. It may look like a lousy fixture if the images are not correct but I don't think anyone will pay for 10 - 20 hours work just to get patterns correct.
And to inspire you two have a look on my solution for the laser.
/Jan
You do not have the required permissions to view the files attached to this post.
- djSupport
- Hosts the Freestyler Forum and is an Admin!
- Posts: 1902
- Joined: July 9th, 2007, 6:57 pm
- FreeStyler Version: Forum la
- I Use FreeStyler for: Just for the Fun of it.
- Contact:
Re: Chauvet Radius 2.0 Profile?
since doing the paid fixture service i've amassed 1170 custom image labels!
and yes jan, it takes hours and thats what i'm charging for...
and yes jan, it takes hours and thats what i'm charging for...
Heather Trott, You Babe! I Drive a Dacia Duster and Explore! Check it out
-
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: January 4th, 2011, 9:57 pm
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Chauvet Radius 2.0 Profile?
Takes forever.
Just to say you have worked for your money.
Just to say you have worked for your money.