Help Please - Showtec Phantom 50 Spot LED [SOLVED]
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
- BillsGate
- Possibly Becoming Qualified FS User
- Posts: 54
- Joined: June 5th, 2011, 9:06 am
- FreeStyler Version: 4.x
- I Use FreeStyler for: DJ
- Contact:
Re: Help Please - Showtec Phantom 50 Spot LED
It seems like you are using a 13ch fixture while the lamp is set to 8ch. I have set mine to 13ch mode
My show: http://www.reflexshows.nl | My vids: http://www.youtube.com/user/the7wan
- Uriahdemon
- FS is my life
- Posts: 266
- Joined: August 18th, 2012, 10:15 am
- FreeStyler Version: 3.5.5
- I Use FreeStyler for: Band
- Contact:
Re: Help Please - Showtec Phantom 50 Spot LED
Hi Folks,
Does anyone have an Easy View 3D file for this fixture please. The built in one does not correspond with the FS fixture file due to the Pan and Tilt channels being built wrongly. The FS fixture file corresponds with the manual i.e. CH 1 - Pan, CH2 - Tilt, CH3 Pan 16 Bit, CH 4 16 Bit.
Unfortunately the Easy View 3D fixture file is set up for CH1 - Pan, CH2 - Pan 16Bit, CH3 - Tilt, CH3 - Tilt, CH4 - Tilt 16 Bit.
Any help greatly appreciated as I am not too good with EV3D fixture creating and need to get this sorted ASAP. I am working on it though and as soon as I have it sorted I will share with others.
Does anyone have an Easy View 3D file for this fixture please. The built in one does not correspond with the FS fixture file due to the Pan and Tilt channels being built wrongly. The FS fixture file corresponds with the manual i.e. CH 1 - Pan, CH2 - Tilt, CH3 Pan 16 Bit, CH 4 16 Bit.
Unfortunately the Easy View 3D fixture file is set up for CH1 - Pan, CH2 - Pan 16Bit, CH3 - Tilt, CH3 - Tilt, CH4 - Tilt 16 Bit.
Any help greatly appreciated as I am not too good with EV3D fixture creating and need to get this sorted ASAP. I am working on it though and as soon as I have it sorted I will share with others.
Mac
www.mclite.co.uk
www.mclite.co.uk
-
- Moderator
- Posts: 948
- Joined: September 18th, 2012, 9:32 pm
- FreeStyler Version: None
- I Use FreeStyler for: To help others here on the Forum!
Re: Help Please - Showtec Phantom 50 Spot LED
+Uriahdemon wrote:Hi Folks,
Does anyone have an Easy View 3D file for this fixture please. The built in one does not correspond with the FS fixture file due to the Pan and Tilt channels being built wrongly. The FS fixture file corresponds with the manual i.e. CH 1 - Pan, CH2 - Tilt, CH3 Pan 16 Bit, CH 4 16 Bit.
Unfortunately the Easy View 3D fixture file is set up for CH1 - Pan, CH2 - Pan 16Bit, CH3 - Tilt, CH3 - Tilt, CH4 - Tilt 16 Bit.
Any help greatly appreciated as I am not too good with EV3D fixture creating and need to get this sorted ASAP. I am working on it though and as soon as I have it sorted I will share with others.
Hey, I've had a bit of experience with 3D files and creating them. If you wanna PM me the manual or post it here, then I'll see if I can create it for you like the FS one is setup
- Uriahdemon
- FS is my life
- Posts: 266
- Joined: August 18th, 2012, 10:15 am
- FreeStyler Version: 3.5.5
- I Use FreeStyler for: Band
- Contact:
Re: Help Please - Showtec Phantom 50 Spot LED
Hi Nathanars,
Just spent a little time sorting stuff out and it was the Easy View 3D fixture file that was wrong. So I have amended it and all good now. I am doing some experimenting before buying the moving heads I am thinking of. What was actually wrong was the Tilt and Pan 8/16 bit channels were the wrong way round.
I should really have spotted that sooner.
Thanks for the offer of help anyway. I am sure there will be another time pretty soon.
Rgds Mac
Just spent a little time sorting stuff out and it was the Easy View 3D fixture file that was wrong. So I have amended it and all good now. I am doing some experimenting before buying the moving heads I am thinking of. What was actually wrong was the Tilt and Pan 8/16 bit channels were the wrong way round.
I should really have spotted that sooner.
Thanks for the offer of help anyway. I am sure there will be another time pretty soon.
Rgds Mac
Mac
www.mclite.co.uk
www.mclite.co.uk
-
- Moderator
- Posts: 948
- Joined: September 18th, 2012, 9:32 pm
- FreeStyler Version: None
- I Use FreeStyler for: To help others here on the Forum!
Re: Help Please - Showtec Phantom 50 Spot LED
Glad you sorted it