Differences

This shows you the differences between two versions of the page.

--- freestyler_plugins:ledtrix1 [2011/10/19 16:32] – created Spirit
+++ freestyler_plugins:ledtrix1 [2013/03/11 03:46] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== LedTrix – Setup Window ======
+\\
+Instead of describing the parameters that can be set in the “Setup window” and example has been made.\\
-Instead of describing the parameters that can be set in the “Setup window” and example has been made.
+\\
+It is important to note that Ledtrix and Suntrix don’t have a direct connection to the fixture. If Ledtrix is Setup to have a red in channel 1 then it will send this pixel values to channel 1 even if it is a movement control for a moving head.\\
-In the example I have used 8 x ”Kam Led 800 Stripline” to create an 8 x 8 matrix.
+\\
+In the example I have used 8 x ”Kam Led 800 Stripline” to create an 8 x 8 matrix.\\
+\\
-{{:ledtrix_kam_matrix.jpg|}}
+{{:ledtrix_kam_matrix.jpg|}}\\
+\\
+\\
-Each Kam has 8 segments that uses 6 DMX channels for control.
+Each Kam has 8 segments that uses 6 DMX channels for control. \\
-The 6 channels looks like this bellow.
+The 6 channels looks like this bellow.\\
+\\
 With LedTrix we only want to control the colors because it is a tool to display graphics meaning that only 2, 3, and 4 are of interest.\\
 A whole Kam stripline uses 6 x 8 = 48 addresses and whole matrix of 8 Kams uses 8 x 48 = 384 addresses.
@@ Line 87: / Line 87: @@
 {{:ledtrix_image_spacing_01.jpg|}}
+\\
+\\
+----
+\\
+===== Images, when the pixel is 3RGB colors next to each others . =====
+\\
+The animated images are made as RGB pixels. this means that each pixel has a color that consist of RGB.\\
+When led are used then it is often single color and this look of 3 single leds is not the same as an RGB pixel\\
+\\
+Example: A pixel that are yellow will be made with a red and a green led on.\\
+Looking into the 3 led RGB fixture the eyes will see a red and a green light.\\
+Not the yellow as expected.\\
+\\
+This leads to that the images may not look as expected unless it is real RGB leds that are used.\\
+\\
+Also if the fixture places the colors next to each others like the Revo 4 from American DJ this are to be taken into account.\\
+\\
+This don’t means that these types of fixtures can’t be used but it means that the images don’t looks as expected.\\
+\\
+Also a thing to note is that many fixtures comes with a white led. RGBW.\\
+Images only have RGB information and LedTrix has therefore no white control in the setup panel. This means that this has to be skipped like bellow.\\
+\\
+{{:freestyler_plugins:revo_04_matrix_01.gif|}}\\
+\\
+The address for each pixel will then look like this.\\
+It is basically a 8 x 8 matrix with all colors next to each others.\\
+\\
+{{:freestyler_plugins:led_matrix_03.gif|}}\\
+\\
+Note: The pixel order may be different. Here it is From Left to Right, Top to Bottom but I have not hat a Revo 4 available and have therefore not been able to verify this.  \\
+\\
+\\
+And in LedTrix the Setup where the white channel are skipped will then look like this.\\
+\\
+{{:freestyler_plugins:revo_04_ledmatrix_setup_01.gif|}}\\
+\\
+\\
+\\
+----
+\\