Differences

This shows you the differences between two versions of the page.

--- fixture_creator_-_par_cans_dimmers [2010/02/01 18:12] – Added more info. Onge
+++ fixture_creator:tutorial:par_cans_dimmers [2013/03/11 04:02] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-[[welcome|{{:backbutton.jpg|Back to Main Page}}]]
+[[welcome|{{:fshome.jpg|Back to Main Page}}]]
+------
 ====== Fixture Creator Tutorial - Par Cans, Dimmer Packs, Switch Packs ======
@@ Line 42: / Line 42: @@
 The **Locate** field is used to set a value for this channel to be sent to the fixture when you are in FreeStyler and you right click on the fixture and the select **Locate selected fixtures**, this makes it easier to identify where in the real world they are "located". I have set the "intensity" to 128 or 50% so it will not be to bright but will be enough to see it clearly.\\
 The **default** field is used to set a value that will be used by FreeStyler when we first start to program them, normally 0 (zero) but for example on a moving head or scanner you might want to set the pan/tilt to 128, which would be a centre position.\\
-More info on these values can be found here on the [[fixture_creator_-_channel_description|Channel Description]] page.
+More info on these values can be found here on the [[fixture_creator:channel_description|Channel Description]] page.
 {{:images:fixture_creator_tutorial:parcan:00006.png?nolink|}}
@@ Line 90: / Line 90: @@
 As mentioned above there are problems in creating multi channel versions of Par Cans or Dimmer Packs. There are problems trying to create either a single channel or mult-channel switch packs.
-Multi-channel Par Cans and Dimmer Packs will not actually have available the "**Lamp**" panel in FreeStyler. So you will only have control of the channels using the sliders at the right edge of the screen. The **Blackout** button and **Mater Intensity** control still work.\\
+Multi-channel Par Cans and Dimmer Packs will not actually have available the "**Lamp**" panel in FreeStyler. So you will only have control of the channels using the sliders at the right edge of the screen. The **Blackout** button and **Master Intensity** control still work.\\
 Possibly the most sensible way would be to patch a single channel fixture profile for each of the fixtures that are connected to the dimmer pack channels rather than a multi-channel fixtures, but that does depend on your screen "real-estate" and how many fixtures you are trying to control. Trying different ways will tell you the most efficient way for you to work and control the fixtures.
@@ Line 111: / Line 111: @@
 ====== Downloads ======
 {{:images:fixture_creator_tutorial:parcan:generic_par56_red.pff|Generic PAR56 Red Fixture File}}
+------
-[[welcome|{{:backbutton.jpg|Back to Main Page}}]]
+[[welcome|{{:fshome.jpg|Back to Main Page}}]]