Differences

This shows you the differences between two versions of the page.

--- fixture_creator_gobo_configuration [2011/06/21 20:05] – Jan_K
+++ fixture_creator:gobo_configuration [2013/03/11 03:45] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-====== Fixture Creator Gobo configuration ======
+====== Fixture Creator - Gobo configuration ======
 \\
 The Gobo wheel configuration is simple. There are 3 wheels to control with 5 faders.\\
@@ Line 6: / Line 6: @@
 \\
 The Gobo control is a mix of faders and icons which direct control the gobohc. 1, 2 and 3.\\
-For the goboch the number of gobos / icons (n gobos) are to be set. The number of gobos are to be at least 1.\\
+For the goboch the number of gobos / icons (n gobos) are to be set.\\
+The number of gobos are to be at least 1 and max is 150.\\
 Additional Goboch. 1 and 2 has a channel to control rotation. Normally this fader in it’s full range have a rotation direction and a rotation speed control where the first half is in one direction and the other half is in the other direction. The rotation control don’t necessarily have to be defined. If they are not defined then the rotation fader is not present in the panel.\\
 \\
@@ Line 20: / Line 21: @@
 For Gobo wheel 1, 9 values are to be entered and the related icons added.\\
 Entering the DMX value can be done manually but if there are many then auto generator can be used. This is found under “Option”\\
-See:[[fixture_creator_auto_generate|Auto Generator]]\\
+See:[[fixture_creator:auto_generate|Auto Generator]]\\
 \\
 The values for the single gobo’s are normally defined in a range and not a single value.\\
 It could be 8 to 38 for gobo no 2. The optimal will then be to use the middle value here 23. (8 + 38)/2 = 23.\\
+See evt. [[:fixture_creator:tutorial:fixture_creator_tutorial_middle_value|]]\\
 If the icons for the gobo wheel are not present in the gobo library then they are to found on the net, by the manufacturer or made by taking some snapshots and then placed in the gobo folder.\\
-See:[[fixture_creator_pictures_and_icons|Pictures and Icons.]]\\
+See:[[fixture_creator:pictures_and_icons|Pictures and Icons.]]\\
 \\
 Take the time to do this part properly because this fixture will last for many years and the satisfaction of having a pro looking fixture will be a joy each time it is used.\\
@@ Line 48: / Line 50: @@
 To place the icons in two rows the two sets of icons are placed as no 1, 2 and 11 and 12,
 In between “blank.gif” icons are added to fill-in white fields.\\
-Looking on icon 9 and 19s place no icon is added.\\
+Looking on icon 9 (DMX value 102) and 19s (DMX value 255)place no icon is added.\\
 When a icon in not added in the table then it will be shown in the panel as a red X.\\
 \\
@@ Line 57: / Line 59: @@
 \\
 \\
-Gobo Panel description
+{{:images:panel_description_gobo_05.gif|}}\\
-The gobo wheel  panel is simple but it is offend used for a wide range of controls that has nothing to do with gobos.
 \\
 \\
+----
+\\
+**Gobo Panel description.**\\
+\\
+The gobo wheel  panel is simple but it is offend used for a wide range of controls that has nothing to do with gobos.\\
+\\
+{{:images:panel_description_gobo_01a.gif|}}\\
+\\
+In the gobo panel, 3 gobo wheel controls are available with fader and icons. 2 of the gobo wheels has an additional fader for rotation control.\\
+The Gobo channel and the icons are the same channel. When a icon is pressed then the blue fader will shift to the value for this icon.\\
+The yellow fader is the rotation control. Normally the first half of the fader set the rotation and speed in one direction and the other  half of the fader set the rotation and the speed in the other direction.\\
+\\
+In this panel gobo wheel 3 is set to function control to show that also function control form time to time are placed in gobo wheel panel.\\
+In some fixtures all gobo wheels controls are used for other control function.\\
+As example this Laser fixture to a Laserworld, RS200G See: {{ :images:laserworld_rs200g-1.pff |}} {{ :images:laserworld_rs200g-2.pff |}}\\
+\\
+The two rows of icons in gobo wheel 3 is created by defining 20 icons and fill in blanks.\\
+Note the two red X. The two red X is shown because no icons are attached to these values in the gobo table.\\
 \\
-In the gobo panel, 3 gobo wheel controls are available with fader and icons. 2 of the gobo wheels has an additional fader for rotation control.
+The two nodes for sound off and on are macros will be shown by pressing the white “+” in the green triangle in the lower left corner.\\
-The Gobo channel and the icons are the same channel. When a icon is pressed then the blue fader will shift to the value for this icon.
+See: [[fixture_creator:macro_configuration|Fixture Creator - Macro Configuration]].
-The yellow fader is the rotation control. Normally the first half of the fader set the rotation and speed in one direction and the other  half of the fader set the rotation and the speed in the other direction.
-In this panel gobo wheel 3 is set to function control to show that also function control form time to time are placed in gobo wheel panel.
-In some fixtures all gobo wheels controls are used for other control function.
-As example this Laser fixture to a Laserworld, RS200G See Link
-Note the two red X. The two rows of icons in gobo wheel 3 is created by defining 20 icons and fill in blanks. The two red X is shown because no icons are attached to these values in the gobo table.
-The two nodes for sound off and on are macros will be shown by pressing the white “+” in the green triangle in the lower left corner.
-See: Link Macro.
 \\
 \\
 ----
 \\
-{{:images:panel_description_gobo_01.gif|}}
-{{:images:panel_description_gobo_05.gif|}}