Differences

This shows you the differences between two versions of the page.

--- external_control [2013/04/16 01:59] – lindsayward
+++ external_control [2019/01/17 06:18] (current) – Jan_K
@@ Line 8: / Line 8: @@
 === External Commands ===
 External commands are actions that FreeStyler can perform based on a command it receives, from an external controller (any of the methods listed here).
-Here you can find a list with all the External Commands: \\
+Here you can find a list with all the external commands: \\
-[[external_control:external_commands|]]
+[[external_control:external_commands|]]\\
+The screenshot below shows the settings window with External Controls opened on the left and the MIDI options on the right. This shows the list of external commands that can be configured (in this case via MIDI signals).\\
+{{:externalcontrolmidi.png|}}
 \\
 === Touchscreen ===
@@ Line 33: / Line 36: @@
 If more MIDI interfaces are to be used then a patch program like MIDI-OX and MIDI Yoke can be used.\\
 MIDI-OX combines MIDI signal from more devices into one.\\
-You can do a lot more with MIDI-OX, and MIDI Yoke is a Virtual MIDI cable, so you can connect the MIDI controller to MIDI-OX and from MIDI ox with a virtual MIDI cable (MIDI Yoke) to FreeStyler.
+You can do a lot more with MIDI-OX, and MIDI Yoke is a Virtual MIDI cable, so you can connect the MIDI controller to MIDI-OX and from MIDI ox with a virtual MIDI cable (MIDI Yoke) to FreeStyler.\\
+Midi examples\\
 \\
   *[[external_control:MIDI:MIDI_interface| Using MIDI Interface]]
@@ Line 40: / Line 44: @@
   *[[external_control:MIDI:3xbcf2000_MIDI_tutorial|Using 3x BCF2000 tutorial]]
   *[[external_control:go-back_on_encoder|Go and back on a encoder tutorial]]
+  *[[external_control:midi:novation_launchpad| Novation Launchpad]]
 \\
 === Enttec Wings ===
@@ Line 52: / Line 57: @@
   * FSOC : FreeStyler Command
   * 002 : Command Code from reference document (in this instance 002 is blackout)
-  * 255 command parameter (255 is button click)
+  * 255 command parameter (255 is button down, 0 is button up. For sliders e.g intensity or speed value between 0-255)
-=== Apps ===
+Request button captions and other data Byte Protocol: 9 bytes
-**Android**
 \\
-  * FreeStyler Remote Lite \\ https://play.google.com/store/apps/details?id=uk.co.matthewgroberts.FreeStylerlite
+  * bytes 0 to 3 FSBC Freestyler recieve command
+  * bytes 4 to 6 request code (see table)
-  * FreeStyler Remote Pro \\ https://play.google.com/store/apps/details?id=uk.co.matthewgroberts.FreeStylerPro
+  * bytes 7 to 9 are reserved for future use.
-**iOS**
 \\
-  * FreeStyler DMX Remote \\ https://itunes.apple.com/gb/app/FreeStyler-dmx-remote/id417748124?mt=8
+  * byte 0: “F”
+  * byte 1: “S”
+  * byte 2: “B”
+  * byte 3: “C”
+  * byte 4,5 and 6 : Code
+  * byte 7,8 and 9 : 0
+\\
+\\
+\\
+=== Remote control via wifi. ===
+\\
+Freestyler can be remotely controlled via smart phone or tablet, allowing the user to move around and still keep in control of Freestyler or adjust their lighting. \\
+It may also serve as a secondary touch screen to compliment alongside the main display.\\
+\\
+See [[external_control:remote_control_wifi]]\\
 \\
+----