====== Output Menu ======
\\
\\
In this menu Lock Output and Show Output are available.\\
\\
{{:images:output_menu:output_menu.gif|}}\\
\\
\\
==== Lock Output ====
This function freeze the output from FreeStyler.\\
All fixtures will get a red box and in the menu bar a padlock is shown (Right side).\\
To unlock click “Lock Output” again.\\
\\
{{:images:output_menu:lock_output.gif|}}\\
\\
\\
==== Show Output ====
This window monitor the actual output value on the channels.\\
\\
{{:images:output_menu:show_output.gif|}}\\
\\
**If a channel has been manipulated then the text will be shown as white on a red background.**\\
{{:images:setup_menu:setup_preferences_correction_output.gif|}}\\
The manipulation can be patching to an other channel or a correction offset.\\
See: [[setup:setup_preferences#Patch|]] and [[setup:setup_preferences#Correction|]]\\
NOTE: this windows show the actual DMX value's (3d view can act differnt then this window.)\\
\\
\\
\\
By right clicking on a channel the popup menu bellow appears.\\
\\
{{:images:output_menu:show_output_popup_menu.gif|}}
\\
\\
=== Invert Channel ===
This function inverts the output.\\
Normal the fader from 0 to 100 % gives the DMX value 0 to 255. Inverted the fader 0 to 100 % giver the DMX values 255 to 0.\\
\\
\\
=== Disable Channel ===
Disable the single channel so the value for this channel will not change but continue having the value from the time where it was disabled.\\
\\
\\
=== Remove Channel from playback ===
\\
Remove channel from playback, stopts the channels that are active in the Submaster, Cue window, Cuelistbuttons.\\
also look at: [[playback:overridebuttons:override_blue_triangle|Override / Blue triangle]]\\
\\
\\
=== Reset channel settings ===
Remove lowest, highest limit, invert, disable, patching and correction for the single channel.\\
\\
\\
=== Reset all channel settings ===
Same as above but for all channel.\\
\\
\\
=== Set as lowest limit ===
Is set by moving the control for this channel to a given value and then “Set as lowest limit”\\
The value from the control can not go lower than this value.\\
It is reset by Reset channel settings.\\
\\
\\
=== Set as highest limit ===
Same as above but just for highest limit.\\
\\
\\
=== Remove limits ===
This simply removes the limits that are set with "Set as lowest limit" and/or "Set as highest limit".\\
\\
\\
----
\\