====== Fixture Creator - Framing configuration ======
\\
Framing is basically a way to shape the beam.\\
It is done by moving 4 blade in front of the beam where each blade is controlled by 2 DMX channels.\\
\\
Framing is enabled by check on the Enable Framing box.\\
\\
{{:images:fixture_configuration_framing_01.gif|}}\\
\\
Configuration of the Framing blade control is on the “Framing config” tab.\\
\\
{{:images:fixture_configuration_framing_02.gif|}}\\
\\
The control is defined as a position in each corner of the blade. This is the only type of definition that are available at the moment.\\
Fixture as Martin MAC III performance has a blade definition consisting of Position and Angle for each blade. This is not configurable at the moment.\\
\\
Additional to the 4x2 position channels a "rotation channel" is available.\\
\\
----
\\