These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

BeamZ IntiBar 300

Fixture File Help & Support, This is not a Request forum we are here to help you not work for you... If you do need a fixture and don't wish to make one yourself or learn then go here : http://www.freestylersupport.com/wiki/f ... on_service
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service


You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
Post Reply
storer77101
Just started using FS
Posts: 10
Joined: June 12th, 2018, 7:49 pm
I Use FreeStyler for: Where do I start?

BeamZ IntiBar 300

Post by storer77101 »

Hi all,
Would it be possible for one of you talented people to create me a profile for this fixture please, much appreciated
I have linked the manual:
https://www.manua.ls/beamz/intibar-300- ... manual?p=9

Kind regards
Daniel


Rod_Horning
Moderator
Posts: 766
Joined: November 16th, 2016, 2:24 pm
FreeStyler Version: 4.1.6
I Use FreeStyler for: Stage Show

Re: BeamZ IntiBar 300

Post by Rod_Horning »

Hello

Can you supply the shape of GOBO 1,2 ...8 and the color of Color 1,2 ... 8

This will make the fixture definition more helpful when you program a sequece.
storer77101
Just started using FS
Posts: 10
Joined: June 12th, 2018, 7:49 pm
I Use FreeStyler for: Where do I start?

Re: BeamZ IntiBar 300

Post by storer77101 »

Hey unfortunately I don't have that information.
Rod_Horning
Moderator
Posts: 766
Joined: November 16th, 2016, 2:24 pm
FreeStyler Version: 4.1.6
I Use FreeStyler for: Stage Show

Re: BeamZ IntiBar 300

Post by Rod_Horning »

OK.
Do you still need the fixture created?
If so, what version of Freestyler are you using?
The GOBO shapes and Color 1, 2 ... can be added to the fixture later.
storer77101
Just started using FS
Posts: 10
Joined: June 12th, 2018, 7:49 pm
I Use FreeStyler for: Where do I start?

Re: BeamZ IntiBar 300

Post by storer77101 »

Hi Rod,
I do if possible, I am using version 4.1.5. Much appreciated

Kind Regards
Daniel
Rod_Horning
Moderator
Posts: 766
Joined: November 16th, 2016, 2:24 pm
FreeStyler Version: 4.1.6
I Use FreeStyler for: Stage Show

Re: BeamZ IntiBar 300

Post by Rod_Horning »

Attached is a fixture definition that I think will work with your instrument.

The GOBO wheel only has numbers as I did not see any graphics.

I did not see documentation on what color was color 1, color 2, etc. I set up macros to select the color instead of the color wheel since I could get number graphics for the macro picture.

Also, being time constrained at the moment, I did not define macros for the functions on channel 7 (I would have to create meaningful graphics and that will take some time).

Give it a try and let me know how it works. It can always be updated if you obtain additional information (such as what color matches the numbers in the macros).

I suggest you read the forum about the 4.1.5 issues. You may want to install 4.1.6
You do not have the required permissions to view the files attached to this post.
storer77101
Just started using FS
Posts: 10
Joined: June 12th, 2018, 7:49 pm
I Use FreeStyler for: Where do I start?

Re: BeamZ IntiBar 300

Post by storer77101 »

Hi Rod,
Thank you very much, will try this out tonight. Your time is much appreciated.

Cheers
Post Reply

Return to “FreeStyler Fixture Files - Help & Support”