These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

Chauvet Wash FX HEX

Fixture File Help & Support, This is not a Request forum we are here to help you not work for you... If you do need a fixture and don't wish to make one yourself or learn then go here : http://www.freestylersupport.com/wiki/f ... on_service
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service


You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
Post Reply
erico
Just started using FS
Posts: 10
Joined: May 11th, 2013, 1:11 am
FreeStyler Version: 3.4.8
I Use FreeStyler for: DJ

Chauvet Wash FX HEX

Post by erico »

Hello im trying to create the 11 channel profile for this light.
Everything works fine with what I created Use the channels manually.

Where im stuck is making the macros, Im fumbling in this area.
Or getting the pallets to show.

Here is the manual: 11Channel (Would love the 40 channel profile, )
https://www.chauvetdj.com/wp-content/up ... 6_Rev1.pdf

And here is the profile.
You do not have the required permissions to view the files attached to this post.


Rod_Horning
Moderator
Posts: 766
Joined: November 16th, 2016, 2:24 pm
FreeStyler Version: 4.1.6
I Use FreeStyler for: Stage Show

Re: Chauvet Wash FX HEX

Post by Rod_Horning »

Hello

Just my opinion. In order to easily use the 40 channel mode I think you will need to create 2 fixture profiles. One profile (lets call it MASTER) will control channels 1, 2, 3, and 4. The other fixture profile (lets call it ZONE) will control the zones.
Add 1 MASTER to the Freestyler workspace.
Add 6 ZONEs to the Freestyler workspace.

The MASTER starting DMX address must be the same as the DMX address you configure in the instrument.
The 1st ZONE starting DMX address must be 4 higher than the MASTER.
The 2nd ZONE starting DMX address must be 10 higher than the MASTER. (6 higher than the 1st ZONE)
The 3rd ZONE starting DMX address must be 16 higher than the MASTER. (6 higher than the 2nd ZONE)
The 4th ZONE ...
The 5th ZONE ...
The 6th ZONE ...

I suggest that the fixture names and pictures show the relationship and that you group the fixtures on the Freestyler workspace so that it is clear they are related (ie. the same instrument).
erico
Just started using FS
Posts: 10
Joined: May 11th, 2013, 1:11 am
FreeStyler Version: 3.4.8
I Use FreeStyler for: DJ

Re: Chauvet Wash FX HEX

Post by erico »

I see can ya help create the 11 channel 1 then. Thanks
Rod_Horning
Moderator
Posts: 766
Joined: November 16th, 2016, 2:24 pm
FreeStyler Version: 4.1.6
I Use FreeStyler for: Stage Show

Re: Chauvet Wash FX HEX

Post by Rod_Horning »

I am sorry for the very long delay responding to you. I have not been active here for some time.

Do you still need the fixture created?
Post Reply

Return to “FreeStyler Fixture Files - Help & Support”