Hi All,
Seem to be having an issue with the master intensity but I'm not sure if it's an issue with the fixture file or the software..
So, the fixture reacts as normal until the intensity hits 0, when it suddenly goes back to full brightness while all other fixtures are off as they should be.
Looking at the manual here: https://www.chauvetdj.com/wp-content/up ... WOlogo.pdf, it indicates that the intensity channel is just 0-100% so I don't know what's happening..
Any Ideas?
fixture file attached
Master Intensity Issue - Chauvet Barrel 300
Forum rules
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
-
- Knows how to turn Lights ON
- Posts: 4
- Joined: June 30th, 2012, 11:56 pm
- FreeStyler Version: 3.4.6
- I Use FreeStyler for: DJ
Master Intensity Issue - Chauvet Barrel 300
You do not have the required permissions to view the files attached to this post.
-
- FS is my life
- Posts: 772
- Joined: July 11th, 2007, 8:39 pm
- FreeStyler Version: 4.01
- I Use FreeStyler for: Nightclub Lighting
- Twitter: twitter.com/
- Contact:
Re: Master Intensity Issue - Chauvet Barrel 300
I see a couple problems that may be the cause. Try this profile and see if everything works ok, I have a couple of those fixtures
You do not have the required permissions to view the files attached to this post.
-
- Knows how to turn Lights ON
- Posts: 4
- Joined: June 30th, 2012, 11:56 pm
- FreeStyler Version: 3.4.6
- I Use FreeStyler for: DJ
Re: Master Intensity Issue - Chauvet Barrel 300
Hi Partyman, thanks for that. Haven't had chance to test yet but I'll let you know as soon as I have.
Can I ask what was changed - so I can tell in future?
Can I ask what was changed - so I can tell in future?
-
- Knows how to turn Lights ON
- Posts: 4
- Joined: June 30th, 2012, 11:56 pm
- FreeStyler Version: 3.4.6
- I Use FreeStyler for: DJ
Re: Master Intensity Issue - Chauvet Barrel 300
Ah, just reinstalled the fixture and it's the Scan version you've edited - I've got the Barrel which may be different?
-
- FS is my life
- Posts: 772
- Joined: July 11th, 2007, 8:39 pm
- FreeStyler Version: 4.01
- I Use FreeStyler for: Nightclub Lighting
- Twitter: twitter.com/
- Contact:
Re: Master Intensity Issue - Chauvet Barrel 300
profiles are identical