These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

Chauvet Intimidator Spot 360 not working

Fixture File Help & Support, This is not a Request forum we are here to help you not work for you... If you do need a fixture and don't wish to make one yourself or learn then go here : http://www.freestylersupport.com/wiki/f ... on_service
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service


You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
Post Reply
oeuro55
Knows how to turn Lights ON
Posts: 2
Joined: December 14th, 2019, 6:33 pm
FreeStyler Version: 3.6.50
Instagram: tmaproductions

Chauvet Intimidator Spot 360 not working

Post by oeuro55 »

I have 20 light fixtures connected and programmed via FreeStyler working flawlessly. Recently I've purchased a pair of Chauvet Intimidator Spot 360 moving heads and I can not get them to connect at all. DMX channel selected, number of channels set, fixture created using Fixture Creator but these moving heads do not even connect. No LED indicating DMX connection. I am using Enttec Open USB interface and I have other Chauvet fixtures working fine with it. I've seen a few posts where people couldn't get FreeStyler to work with Spot 350 but no one had mentioned Spot 360. Please help! I have a wedding next week and I need to get them to work.


perrip
Commited FS Forum helper
Posts: 142
Joined: May 2nd, 2016, 9:39 pm
FreeStyler Version: 4.6
I Use FreeStyler for: Stage Show

Re: Chauvet Intimidator Spot 360 not working

Post by perrip »

for me in similar situations, I would load a generic fixture file with the right number of channels and play with all the sliders going by the fixture manual first to see if it is a problem with the fixture file, the only other thing I would think is a setting on the light is not letting it accept the dmx signal.
User avatar
djSupport
Hosts the Freestyler Forum and is an Admin!
Posts: 1901
Joined: July 9th, 2007, 6:57 pm
FreeStyler Version: Forum la
I Use FreeStyler for: Just for the Fun of it.
Contact:

Re: Chauvet Intimidator Spot 360 not working

Post by djSupport »

sometimes lights are set in wrong modes sometimes certain dmx values operate or activate certain things like perrip says you can create a generic fixture but you can also use the one you've all ready made, extend the right hand sliders and generally move them around, does the light do anything? The most common check is the first and 4th or any of the first 4 channels control pan and tilt (and 16bit PT) if your light doesn't pan and tilt then the light itself is the problem (or cables) if the dmx box works on other lights with the same cables then again its the light and its setup...
Heather Trott, You Babe! I Drive a Dacia Duster and Explore! Check it out
Post Reply

Return to “FreeStyler Fixture Files - Help & Support”