Page 1 of 1

Lamp on 2nd address stays off

Posted: March 9th, 2022, 1:50 am
by boothb
So i am new here please be patient. I have created a moving head light. I have 2 of the same lights selected on the main screen. I have the start address one the first as "1". And "12" on the second. When i open freestyler and start one of my saved scenes both lights will pan and tilt like they should. light 1 the lamp comes on the second light will not. i have figured if i go to setup and remove the second fixture and then put it back in on same row (2) then it will work fine. Any idea why i have to unload then load it back in.

Re: Lamp on 2nd address stays off

Posted: March 9th, 2022, 9:08 pm
by djSupport
Does the error reoccur now or is it fixed?

Re: Lamp on 2nd address stays off

Posted: March 9th, 2022, 11:22 pm
by boothb
Still have the problem. not sure why the lamp will not come on my second fixture. Its a moving head fixture, with 11 channels. so i have the address on the second fixture to channel 12. it will pan and tilt ( chanels 1-4) . channel 8 is the lamp.

Re: Lamp on 2nd address stays off

Posted: March 16th, 2022, 10:59 am
by djSupport
Hmmm not sure then...

Re: Lamp on 2nd address stays off

Posted: March 17th, 2022, 11:18 pm
by boothb
Thanks for reply. the last 2 times i opened up freestyler it works just fine. Not sure if i changed something to fix it or not. Anyway will keep playing on. Thanks

Re: Lamp on 2nd address stays off

Posted: March 18th, 2022, 11:58 am
by djSupport
No problem