These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

Robe ClubSpot 150CT Mode 1/2/3/4 (Moving head)

Post Reply
User avatar
remco_k
Moderator
Posts: 1233
Joined: October 12th, 2008, 11:27 pm
FreeStyler Version: N/A
I Use FreeStyler for: To help others here on the Forum!

Robe ClubSpot 150CT Mode 1/2/3/4 (Moving head)

Post by remco_k »

(new user of Freestyler checking in here) :mrgreen:
Image
Fixture files for: Robe ClubSpot 150CT Mode 1/2/3/4
Tested: No
Gobos: Exact copy from gobo wheel
Colors: Should be near real life
Default mode: Mode 1 (The fixture defaults to mode 1 if it is new from the factory).
Recommended mode: Mode 1 or 2.
Website of manufacturer: http://www.robe.cz/ Direct link to fixture

I did not test these files yet. Because I don't have these (or any) fixtures by myself.
I will be able to test them in december 2008 (lightshow with rented equipment). But for now, here are the exported fixture files for the Robe ClubSpot 150CT in all available DMX modes this fixture supports. Mode 1(8ch),2(8ch),3(6ch) and 4(6ch).
Mode 1 and 2 are 16 bit Pan/Tilt modes.
If by accident anybody can test these fixture files (only mode 1 is enough), then I will be greatfull.
I really have no idea if these fixture files will work in reallife, I hope and think they do. Never used Freestyler on a real DMX line yet. That will be done in december 2008, as a test. An SGM DMX controller will be the backup. :D
You do not have the required permissions to view the files attached to this post.
Last edited by remco_k on January 19th, 2010, 1:58 pm, edited 1 time in total.
Reason: Updated link to robe website


Developer of the Sound 2 Light application (SL.exe) for FreeStyler: https://www.digiplay.nl/fs
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl
User avatar
remco_k
Moderator
Posts: 1233
Joined: October 12th, 2008, 11:27 pm
FreeStyler Version: N/A
I Use FreeStyler for: To help others here on the Forum!

Re: Robe ClubSpot 150CT Mode 1/2/3/4 (Moving head)

Post by remco_k »

I have tested the "Robe ClubSpot 150CT M1.pff" (Mode 1) and it works perfectly.
Knowing that, the other files should work just as good.
Developer of the Sound 2 Light application (SL.exe) for FreeStyler: https://www.digiplay.nl/fs
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl
Post Reply

Return to “Robe”