These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

Strobe change on save Topic is solved

Questions and discussions regarding FreeStyler Software.
Forum rules
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
Post Reply
RobTjotji
Knows how to turn Lights ON
Posts: 6
Joined: January 6th, 2022, 8:26 pm
FreeStyler Version: 4.1.1Go
I Use FreeStyler for: Just for the Fun of it.

Strobe change on save

Post by RobTjotji »

Hey!

I'm new to Freestyler and DMX.
I have started to understand but have a problem.
I have searched the forum and seen others with similar problems but have not found a solution for me.
The problem is that when i save the sequence and load it again the strobe is changed.

I tried an simple example
Step 1: red light and strobe set to 0
Step 2: set strobe to 1
Step 3: set strobe to 127
Step 4: set strobe to 255
Step 5: set strobe to 0
It works fine at testing :)

I save the sequence and try and it work fine. :D

I Load the same sequence and now it changed.
Step 1: red light and strobe is 255
Step 2: strobe is 1
Step 3: strobe is 1
Step 4: strobe is 127
Step 5: strobe is 255
Now i'M SAD :(

What am I doing wrong?


Partyman
FS is my life
Posts: 772
Joined: July 11th, 2007, 8:39 pm
FreeStyler Version: 4.01
I Use FreeStyler for: Nightclub Lighting
Twitter: twitter.com/
Contact:

Re: Strobe change on save

Post by Partyman »

I believe the fixture file is not correct for that fixture. You may have to build a new one
RobTjotji
Knows how to turn Lights ON
Posts: 6
Joined: January 6th, 2022, 8:26 pm
FreeStyler Version: 4.1.1Go
I Use FreeStyler for: Just for the Fun of it.

Re: Strobe change on save

Post by RobTjotji »

Partyman wrote: January 22nd, 2022, 7:53 pm I believe the fixture file is not correct for that fixture. You may have to build a new one
Thank you.
It was the low med high values that was wrong.
:fs:
Post Reply

Return to “FreeStyler Software”