These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

Having pan and tilt not change

Questions and discussions regarding FreeStyler Software.
Forum rules
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
Post Reply
mattspunkm
Knows how to turn Lights ON
Posts: 3
Joined: May 9th, 2014, 10:20 pm
FreeStyler Version: 3.5.5
I Use FreeStyler for: Band
Twitter: twitter.com/mattspunkm

Having pan and tilt not change

Post by mattspunkm »

I have multiple color sequences that each have the same movement pattern. I want the movement to stay continuous as I select each sequence. It resets each time I choose a different sequence. Is there a way to do this? Thank you.


Rod_Horning
Moderator
Posts: 766
Joined: November 16th, 2016, 2:24 pm
FreeStyler Version: 4.1.6
I Use FreeStyler for: Stage Show

Re: Having pan and tilt not change

Post by Rod_Horning »

Check the channel settings in your sequence(s). There are 3 settings, fade, snap, ignore. If the pan/tilt channels are not set to ignore this will cause your problem. Otherwise the problem could be inherent in the operation of the instrument.
Rod_Horning
Moderator
Posts: 766
Joined: November 16th, 2016, 2:24 pm
FreeStyler Version: 4.1.6
I Use FreeStyler for: Stage Show

Re: Having pan and tilt not change

Post by Rod_Horning »

Upon rereading your question I do not think my previous answer is correct.

You need 2 sequences to run simultaneously.
One sequence to control the pattern movement
The other sequence to control the color.

Place each of your sequences in the Cue List
Click on the left most gear icon
Click on Cue Multiselect always enabled
Make sure the movement pattern sequence is set to loop
Start the movement sequence
Start the color sequence
When ready start the next color sequence (if the 1st color sequence is looping you will need to click on it to stop it)

Hope this is the correct answer
Post Reply

Return to “FreeStyler Software”