Hi dear,
i hawe problem with pan tilt fixtures. 1. few scenes are recorded 2. reversed pan and tilt are recorded and normally selected 3. the scenes are played but when pan and tilt are not selected with check marks play function doesn't work as recorded under 2.
Are we doing something wrong or is it program bug?
Regards!
Freestyler pan tilt bug
Forum rules
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
-
- Knows how to turn Lights ON
- Posts: 9
- Joined: September 20th, 2016, 9:53 am
- FreeStyler Version: x2
- I Use FreeStyler for: To help others here on the Forum!
- buttza
- FS is my life
- Posts: 351
- Joined: January 7th, 2010, 2:14 pm
- FreeStyler Version: 3.6.4
- I Use FreeStyler for: Stage Show
- Twitter: twitter.com/@buttza
Re: Freestyler pan tilt bug
Make sure your fixture doesn't have P&T inversion on the actual fixture.
You may need to reset it and start from scratch.
Also make sure that you didn't add P&T inversion for that scene only. Inverted P&T should only be used on initial setup and not during scene / Sequence programming.
Hope that helps.
You may need to reset it and start from scratch.
Also make sure that you didn't add P&T inversion for that scene only. Inverted P&T should only be used on initial setup and not during scene / Sequence programming.
Hope that helps.
-
- Knows how to turn Lights ON
- Posts: 9
- Joined: September 20th, 2016, 9:53 am
- FreeStyler Version: x2
- I Use FreeStyler for: To help others here on the Forum!
Re: Freestyler pan tilt bug
Thank you, it be good to freestyler crew make this in new wersion.