These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

Problem with Fog Machine

Discussions concerning DMX gear in general.
Post Reply
Ghoulmen
Knows how to turn Lights ON
Posts: 1
Joined: April 9th, 2015, 6:35 am
FreeStyler Version: 3.6.4
I Use FreeStyler for: Stage Show

Problem with Fog Machine

Post by Ghoulmen »

Hello everyone!

I have a HQ Power VDP1500 SM3 (FOG MACHINE), and i can't use it with the Freestyler...

I'm using the 1 DMX channel to use it... And with a DMX Controller i can use it and the fog it's ok...

But with the freestyler, i've already created a fixture with one channel only, with 0 to 255, but does work... I've used the FOG Controler and even selecting the fixture and go the channel 1 and sliding it from 0 to 255... and nothing... Did anyone had the same problem?

Thank you :mrgreen:


Nathanrs93
Moderator
Posts: 948
Joined: September 18th, 2012, 9:32 pm
FreeStyler Version: None
I Use FreeStyler for: To help others here on the Forum!

Re: Problem with Fog Machine

Post by Nathanrs93 »

Hi
It could be a 2 channel Fog machine? Be sure to check the manual and double check, but it's known that some are 1 channel and others are 2 channel.
Post Reply

Return to “Other DMX/Lighting questions”