These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

Showtec Inversion

Post Reply
User avatar
djotto
Starting to get to grips with FreeStyler
Posts: 19
Joined: July 20th, 2010, 9:41 pm
FreeStyler Version: 3.6.51
I Use FreeStyler for: DJ

Showtec Inversion

Post by djotto »

This is my custom made fixture for the Showtec Inversion 17Ch mode.

I did'n set the pan and tilt options because of the four mirrors.
Please select also the "Showtec Inversion Mirror" fixture and set the DMX channel to the correct channel of each mirror.

I also set the Movement Speed option to the Intensity Channel.
This way you can use a Submaster fader in to control teh movement speed. This is very usefull when you are using the touchscreen mode.
You do not have the required permissions to view the files attached to this post.


Jan_K
Pro Supporter! (Moderator)
Posts: 1155
Joined: January 4th, 2011, 9:57 pm
FreeStyler Version: Beta
I Use FreeStyler for: To help others here on the Forum!

Re: Showtec Inversion

Post by Jan_K »

Hej

I just had a quick view on your fixture.

I think it is a bit difficult for other users to figure out which address they are to place the mirrors on.
They will need the manual each time they have to add it.

Have you considered to make 4 x 17 ch fixture. They are then to be placed on the same start address.
The only difference on the 4 fixtures are the mirror control.
no 1: All general control + mirror 1
no 2: All general control + mirror 2
no 3: All general control + mirror 3
no 4: All general control + mirror 4

You have reduced the fixtures to 4 instead of 5.
And it doesn't matter which one of the fixtures you use for general control as they all have the same start address

/Jan
Post Reply

Return to “Showtec”