These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

American DJ Nucleus Led

Post Reply
Jan_K
Pro Supporter! (Moderator)
Posts: 1155
Joined: January 4th, 2011, 9:57 pm
FreeStyler Version: Beta
I Use FreeStyler for: To help others here on the Forum!

American DJ Nucleus Led

Post by Jan_K »

Note this is a not tested fixture.
Color may be wrong because they are found by there names on the net.

This Center effect is basically 6 scanners with an extra macro / common control.
The scanner control has 3 channel to control Pan, Tilt and Color
The Macro control has 4 channels Movement macro + speed and Color macro + speed.

This fixture can be set to a 4 channel mode, 18 channel mode and a 22 channel mode.

4 Channel mode:
Macro control fixture.

18 Channel mode:
6 scanner fixtures are to be used.
Arddress.
1 – 3 Scanner 1
4 – 6 Scanner 2
7 – 9 Scanner 3
10 – 12 Scanner 4
13 – 15 Scanner 5
16 – 18 Scanner 6


22 Channel mode:
6 scanner fixtures are to be used.
Only Macro control fixture.
Arddress.
1 – 3 Scanner 1
4 – 6 Scanner 2
7 – 9 Scanner 3
10 – 12 Scanner 4
13 – 15 Scanner 5
16 – 18 Scanner 6
19 – 22 Macro control
AmericanDJ_Nucleus_Ctrl.pff
AmericanDJ_Nucleus_Scanner.pff
nucleus_led.pdf
/Jan
You do not have the required permissions to view the files attached to this post.


j141
Starting to get to grips with FreeStyler
Posts: 17
Joined: November 22nd, 2010, 1:56 pm

Re: American DJ Nucleus Led

Post by j141 »

Thanks! I will let you know how I get on with it when my light arrives :)
j141
Starting to get to grips with FreeStyler
Posts: 17
Joined: November 22nd, 2010, 1:56 pm

Re: American DJ Nucleus Led

Post by j141 »

Hi,

Thanks again for this fixture profile.

I have found a couple of things:

1.) I had to configure the shutter channel as 3 and closed as DMX 1 so blackout would work
2.) The colours are way out as you said they might be, when my new haze machine turns up and I can see the beams I am going to redo, I think you got it right by the names in the manual but unfortunately the names dont match the actual colours produced.

Once done I will upload the new profile.

I am starting to think this unit is best left on the SA macro as programming this to do anything decent will be very time consuming!

Thanks again!
Jan_K
Pro Supporter! (Moderator)
Posts: 1155
Joined: January 4th, 2011, 9:57 pm
FreeStyler Version: Beta
I Use FreeStyler for: To help others here on the Forum!

Re: American DJ Nucleus Led

Post by Jan_K »

Hej

I see your point in blackout.
What do you set your open value to. ?

And it will be great if you can upload the fixture with colors.
I have used it as a tutorial in the wiki :)


/Jan
j141
Starting to get to grips with FreeStyler
Posts: 17
Joined: November 22nd, 2010, 1:56 pm

Re: American DJ Nucleus Led

Post by j141 »

Hi Jan,

It didn't force me to put an open value but in the end I put 255 in which is the sort of white colour it does :)

I had to set the shutter channel on the CTRL also but there is a problem with this, you can only set one shutter chan per fixture and with the CTRL both chans 2 and 4 must be 0 for blackout to work, so depending on what you are doing it still doesn't always work.

I might split the CTRL in to 2 separate fittings to get round this :)
j141
Starting to get to grips with FreeStyler
Posts: 17
Joined: November 22nd, 2010, 1:56 pm

Re: American DJ Nucleus Led

Post by j141 »

Hi,

Files as promised, the colours should be more accurate now, its tricky as a lot of the colours on this unit are very similar!
You do not have the required permissions to view the files attached to this post.
Jan_K
Pro Supporter! (Moderator)
Posts: 1155
Joined: January 4th, 2011, 9:57 pm
FreeStyler Version: Beta
I Use FreeStyler for: To help others here on the Forum!

Re: American DJ Nucleus Led

Post by Jan_K »

Hej

Here is something I don't under stand.

Channel 1 / 19 is the one for movement control and the value 255 should bring it into sound mode.
It should not have anything to do with Open and Closed shutter.

Well sometimes you need to have the fixture to figure out whats wrong.
I would had guessed that it was the scanner part that had to control the shutter and thereby blackout.

Can see that the colors was a bit off :)

If you need more icons and colors then there are two fixtures that only contain icons.
Install them and you have all the icons available.
http://www.freestylersupport.com/fsforu ... f=6&t=3599

\Jan
j141
Starting to get to grips with FreeStyler
Posts: 17
Joined: November 22nd, 2010, 1:56 pm

Re: American DJ Nucleus Led

Post by j141 »

Hi Jan,

Im not sure what you mean?

Ch 19 = Preprogrammed shows and around 255 on this is sound activated mode, 0 being LED's off/closed shutter :)

The colours are a bit ood because it is a TRI LED light, if you look at the fixture the colours look solid but if you look at the actual beans the colours always seem to be half red/half green etc etc

Here is a brief video of it in action:

http://www.youtube.com/watch?v=T7a8yKfkCbY

I will download and install the extra colours thanks :)
Jan_K
Pro Supporter! (Moderator)
Posts: 1155
Joined: January 4th, 2011, 9:57 pm
FreeStyler Version: Beta
I Use FreeStyler for: To help others here on the Forum!

Re: American DJ Nucleus Led

Post by Jan_K »

Channel 1 and 19 are the same, one in 4 ch mode and the ofter in 22 ch mode.

As you can in the DMX table, it is movement not light control. That is why I look like this :?:
Blackout is on ch 3.

But here I think I need the fixture to detect what works and what dosen't. :D
DMX_01.jpg
/Jan
You do not have the required permissions to view the files attached to this post.
j141
Starting to get to grips with FreeStyler
Posts: 17
Joined: November 22nd, 2010, 1:56 pm

Re: American DJ Nucleus Led

Post by j141 »

Ah yes I see what you mean, but the problem is if you are using channel 19 (22 ch mode) say you have the light on movement 1, if you then set channel 21 (22 ch mode) to blackout it wont blackout unless channel 19 is also on 0-9

Can you see what I mean, both 19 and 21 must be 0-9 for it to blackout, if either are anything else it doesn't blackout.

That is why I am thinking we need to split the CTRL in to two separate 2 chan fixtures :)
Jan_K
Pro Supporter! (Moderator)
Posts: 1155
Joined: January 4th, 2011, 9:57 pm
FreeStyler Version: Beta
I Use FreeStyler for: To help others here on the Forum!

Re: American DJ Nucleus Led

Post by Jan_K »

Yes I see.

It may be an idea for a feature request to make a global color for blackout where it then will be possible use a macro for blackout. The macro can then set more channels at the same time.

/Jan
j141
Starting to get to grips with FreeStyler
Posts: 17
Joined: November 22nd, 2010, 1:56 pm

Re: American DJ Nucleus Led

Post by j141 »

Yes I was thinking that maybe they could do something simple like run any macros called "!backout" or similar when blackout is pressed :)
j141
Starting to get to grips with FreeStyler
Posts: 17
Joined: November 22nd, 2010, 1:56 pm

Re: American DJ Nucleus Led

Post by j141 »

Its also worth noting on this light anything you do on channels 19-22 override anything you do on 1-18 :)
Jan_K
Pro Supporter! (Moderator)
Posts: 1155
Joined: January 4th, 2011, 9:57 pm
FreeStyler Version: Beta
I Use FreeStyler for: To help others here on the Forum!

Re: American DJ Nucleus Led

Post by Jan_K »

Question.

If ch. 19 and ch. 21 are set to 0 then channel 1 to 18 are in control.

/Jan
j141
Starting to get to grips with FreeStyler
Posts: 17
Joined: November 22nd, 2010, 1:56 pm

Re: American DJ Nucleus Led

Post by j141 »

Yeah exactly :)
Post Reply

Return to “American DJ”