Page 1 of 1
renkforce 60w LED spot
Posted: January 15th, 2020, 8:45 pm
by quintezz
Good morning . I tried to make the 60w renkforce LED spot in the FS creator but I didn't get it. can somebody help for this ?
https://www.conrad.com/p/led-moving-hea ... -w-1233874
Re: renkforce 60w LED spot
Posted: January 16th, 2020, 9:44 am
by Rod_Horning
Attached is my attempt at a fixture for your instrument.
The following helpful programming windows are available via Windows -> All
Beam (Prism)
Colors
Gobos (I did not find images of the gobos so the Gobo window just uses numbers)
Lamp
Custom Sliders
Pan / Tilt (Note: the pan/tilt limits are configurable on the instrument. The fixture is set for a pan range of 540 and a tilt range of 270)
Your feedback is welcome.
Re: renkforce 60w LED spot
Posted: January 17th, 2020, 11:10 am
by quintezz
thanksssss . i check it and its ok
