Hi ppl, i need fixture fot this moving head
can somebody help?
i think that i can somewhere find fixture profile for light jockey software, but now, i‚m using freestyler
Aiweidy a888 575w spot
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
- Knows how to turn Lights ON
- Posts: 2
- Joined: September 24th, 2018, 8:54 am
- I Use FreeStyler for: Band
-
- Knows how to turn Lights ON
- Posts: 2
- Joined: September 24th, 2018, 8:54 am
- I Use FreeStyler for: Band
Re: Aiweidy a888 575w spot
Hi ppl... i‚m on good way to make profile for aiweidy a888, but i have small problems, that you, dear friends can help me to solve...
you can see Light jockey picture - i have used info for device channels from it
second one
Problem with movement, at the moment when i move blue dot (works fine when changing values at right corner in the menu)
third one
setting at the profile that i have made
you can see Light jockey picture - i have used info for device channels from it
second one
Problem with movement, at the moment when i move blue dot (works fine when changing values at right corner in the menu)
third one
setting at the profile that i have made
-
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: January 4th, 2011, 9:57 pm
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Aiweidy a888 575w spot
Hej
I am not able to see the images clear and you have not submitted the DMX table so it is a bit difficult to see exact what is wrong but here is a guess.
Just a note. On the net I found that it is 14ch fixture and you have only reserved 12ch for. This you need to confirm / figure out. This is very important.
If I read and see this correct then you have pan on ch 11 ant tilt on ch 12.
This means that the entry "Pan 8bit" must be 11 and entry "Tilt 8bit" must be 12
You now need to figure out if this is a fixture with pan and tilt fine control.
If it is then these values are to be entered in the "Pan 16bit" and "Tilt 16bit" entry.
It they are not used then these fields are to be cleared.
My guess is that they are on ch 13 and 14 but this you need to verify.
/Jan
I am not able to see the images clear and you have not submitted the DMX table so it is a bit difficult to see exact what is wrong but here is a guess.
Just a note. On the net I found that it is 14ch fixture and you have only reserved 12ch for. This you need to confirm / figure out. This is very important.
If I read and see this correct then you have pan on ch 11 ant tilt on ch 12.
This means that the entry "Pan 8bit" must be 11 and entry "Tilt 8bit" must be 12
You now need to figure out if this is a fixture with pan and tilt fine control.
If it is then these values are to be entered in the "Pan 16bit" and "Tilt 16bit" entry.
It they are not used then these fields are to be cleared.
My guess is that they are on ch 13 and 14 but this you need to verify.
/Jan