Page 1 of 1

Help me ayra compar 20 fixture

Posted: July 2nd, 2018, 10:11 pm
by Tommygun112
Hi everbody

Can you help me to get a perfect fixture voor ayra compar 20 6 ch???

Re: Help me ayra compar 20 fixture

Posted: July 5th, 2018, 4:51 am
by Rod_Horning
Is this your lighting instrument?

Re: Help me ayra compar 20 fixture

Posted: July 10th, 2018, 3:47 pm
by Tommygun112
Rod_Horning wrote: July 5th, 2018, 4:51 am Is this your lighting instrument?
yes it's the right one

Re: Help me ayra compar 20 fixture

Posted: July 11th, 2018, 6:23 pm
by Rod_Horning
Attached is a 6 channel fixture. You may click on Windows->All to have Freestyler display the helpful programming windows.

There should be 4 custom sliders for the Channel 6 functions (turn the functions off via the standard slider). The manual says there are 15 predefined colours that can be selected by channel 6. The colour selections were not listed so I used a custom slider instead of a colour wheel. If you can provide the colors the fixture can be updated.

Your feedback will be appreciated.

Re: Help me ayra compar 20 fixture

Posted: July 17th, 2018, 9:07 pm
by Tommygun112
Rod_Horning wrote: July 11th, 2018, 6:23 pm Attached is a 6 channel fixture. You may click on Windows->All to have Freestyler display the helpful programming windows.

There should be 4 custom sliders for the Channel 6 functions (turn the functions off via the standard slider). The manual says there are 15 predefined colours that can be selected by channel 6. The colour selections were not listed so I used a custom slider instead of a colour wheel. If you can provide the colors the fixture can be updated.

Your feedback will be appreciated.
Its perfect but i first choice one colour en after one colour i choice color fading but after the colour fading it not can go back two one colour its keep in colour fading or sound mode?

Re: Help me ayra compar 20 fixture

Posted: July 18th, 2018, 12:55 pm
by Rod_Horning
I apologize if I do not understand your problem correctly.

If you used the custom slider to chose Colour Fading or Sound Control you must use the standard Freestyler slider (which appears in the upper right hand corner of the Freestyler window) to set channel 6 to 0. After you set channel 6 to 0 then the RGB colors should function.