Hello everyone
I have some problems with my martin mac 250 in combination with the mac 500, bacause the mac250 can do 540 degrees in pan direction and the mac 500 only 440 degrees. So if I want them all (I have 2 and 2) to do the same move, its pretty hard to program.
So my idea was to give the mac250 new max and min values for pan with the fixture creator. But its not possible, because you can only enter how much degrees the fixture does, not the dmx values...
I tried it also with the correction tool. The problem here is, that this value is only added to the actual value. So the fixtures are in sync at the start position, but they get unsync all the more you move them.
Is there anyone who had the same problem and solved it or anyone with an idea?
Would be very nice
Btw, same problem with tilt, but here the difference between the fixtures isn´t so big as it is at the pan.
Greets!
max/min values for pan and tilt
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
- Knows how to turn Lights ON
- Posts: 1
- Joined: March 24th, 2018, 4:02 pm
- FreeStyler Version: 3.6.4
- I Use FreeStyler for: DJ