Hi i have a cheap chinese led mini par
it sais 8 ch ...
the probleme is every time i put the dmx cable in it it goes into sound activated mode.... if i remove it close the light (off)
it does this in all the cheanel i tried.
faulty device or im too noob for this.
cheap chinese mini par
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
- Knows how to turn Lights ON
- Posts: 2
- Joined: March 14th, 2018, 1:14 am
- FreeStyler Version: x2
- I Use FreeStyler for: DJ
-
- Moderator
- Posts: 766
- Joined: November 16th, 2016, 2:24 pm
- FreeStyler Version: 4.1.6
- I Use FreeStyler for: Stage Show
Re: cheap chinese mini par
Without more detail it is difficult to determine the problem. One possibility it may be that you have the physical instrument configured for DMX and the starting channel address that is configured is such that when you plug in the cable the instrument is reacting to a DMX signal from an active controller such as Freestyler.
-
- Knows how to turn Lights ON
- Posts: 2
- Joined: March 14th, 2018, 1:14 am
- FreeStyler Version: x2
- I Use FreeStyler for: DJ
Re: cheap chinese mini par
thanks
i cannot give more detail. after trying different software it always do the same thing . even with the dmx testin softwar. i have a diy usb to dmx wich the dmx tester tested succefully. as sson as the ligt start blinkin on the dongle the light start reacting to sound in every software i tried i in. it does this with the tester also.
i cannot give more detail. after trying different software it always do the same thing . even with the dmx testin softwar. i have a diy usb to dmx wich the dmx tester tested succefully. as sson as the ligt start blinkin on the dongle the light start reacting to sound in every software i tried i in. it does this with the tester also.