Hello , cau anyone get me fixture for this littlle strobe led please
Thanks
https://www.thomann.de/pt/fun_generatio ... N_383840_3
6.2 Operating mode ‘DMX’
This setting is only relevant if the device is controlled via a DMX controller.
1. Press [Mode] repeatedly until the display shows ‘d.xxx’ .
2. Use [Up] and [Down] to assign a DMX address in the range from ‘d.001’ … ‘d.512’ to the
device and confirm with [Setup].
3. Use [Up] and [Down] to select the desired DMX mode:
Mode Display Highest possible DMX address
1-channel ‘1-ch’ 512
3-channel ‘3-ch’ 510
4. Confirm with [Setup].
Channel Value Function
1 0 … 255 Dimmer (0 % … 100 %)
Functions in 3-channel operation
Channel Value Function
1 0 … 255 Dimmer (0 % … 100 %)
2 Operating mode
0 No function
1 … 127 Programme speed (0 % … 100 %)
128 … 255 Sensitivity sound control (0 % … 100 %)
3 Stroboscope effect
0 … 1 No function
2 … 255 Strobe frequency (0 % … 100 %)
Fixture for Fun Generation LED Pot Strobe 100 Please ?
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
- Knows how to turn Lights ON
- Posts: 6
- Joined: September 28th, 2017, 9:18 am
- I Use FreeStyler for: DJ
-
- Moderator
- Posts: 768
- Joined: November 16th, 2016, 2:24 pm
- FreeStyler Version: 4.1.6
- I Use FreeStyler for: Stage Show
Re: Fixture for Fun Generation LED Pot Strobe 100 Please ?
Attached is my attempt at a fixture for the 3 channel configuration.
Helpful programming windows Lamp and Custom Sliders are available.
Your feedback will be appreciated.
Helpful programming windows Lamp and Custom Sliders are available.
Your feedback will be appreciated.
You do not have the required permissions to view the files attached to this post.
-
- Knows how to turn Lights ON
- Posts: 6
- Joined: September 28th, 2017, 9:18 am
- I Use FreeStyler for: DJ
Re: Fixture for Fun Generation LED Pot Strobe 100 Please ?
My friend thank you for your help
Many thanks
Many thanks