These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

equinox onyx

Fixture File Help & Support, This is not a Request forum we are here to help you not work for you... If you do need a fixture and don't wish to make one yourself or learn then go here : http://www.freestylersupport.com/wiki/f ... on_service
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service


You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
Post Reply
souldude
Just started using FS
Posts: 11
Joined: December 6th, 2017, 2:02 pm
FreeStyler Version: 3.6.4
I Use FreeStyler for: DJ

equinox onyx

Post by souldude »

Hi

had a search but can't find this light profile . has anybody got it or can someone put one together .

ive included the manual for it

says 10 or 14 channels . not much between them so 10 would be fine .

thanks
You do not have the required permissions to view the files attached to this post.


:fs:
Rod_Horning
Moderator
Posts: 766
Joined: November 16th, 2016, 2:24 pm
FreeStyler Version: 4.1.6
I Use FreeStyler for: Stage Show

Re: equinox onyx

Post by Rod_Horning »

Attached is my attempt for the 10ch mode.

The manual did not specify so I may have the RGBW channels incorrect. Please let me know.

The following helpful programming windows are available (top menu Window -> All)
Lamp
Macros
Colors
Custom Sliders

Your feedback will be appreciated.
You do not have the required permissions to view the files attached to this post.
souldude
Just started using FS
Posts: 11
Joined: December 6th, 2017, 2:02 pm
FreeStyler Version: 3.6.4
I Use FreeStyler for: DJ

Re: equinox onyx

Post by souldude »

Hi
thankyou i will check this out
:fs:
souldude
Just started using FS
Posts: 11
Joined: December 6th, 2017, 2:02 pm
FreeStyler Version: 3.6.4
I Use FreeStyler for: DJ

Re: equinox onyx

Post by souldude »

Ok
colours are the reverse on the 2nd tower

Red opposite white
green / blue
blue / green
white / red
:fs:
Rod_Horning
Moderator
Posts: 766
Joined: November 16th, 2016, 2:24 pm
FreeStyler Version: 4.1.6
I Use FreeStyler for: Stage Show

Re: equinox onyx

Post by Rod_Horning »

That complicates things a bit.

In order to control the color properly in Freestyler you will need to use the 14 channel mode.

You will need to physically change the configuration of the instrument to 14 channels.

Attached is a fixture definition for the 14 channel mode.

I used the RGB segments feature so that you will have individual control of each lamp. In the Colors window note the check boxes in the lower left corner. The two on the right side, in the vertical column, tell Freestyler which bank to control. You may check either or both (or un-check both). This allows you to use the color pallet.

Again, I may not have the colors correct. Please check by using the standard Freestyler sliders:
Bring the dimmer channel (channel 4) up full
One at a time slide the 8 lamp controls all the way right - note the color - then all the way left. (CW is white). The lamp color will hopefully match the text of the slider. If not please note which slider controls which lamp and let me know - I'll fix the definition.
Rod_Horning
Moderator
Posts: 766
Joined: November 16th, 2016, 2:24 pm
FreeStyler Version: 4.1.6
I Use FreeStyler for: Stage Show

Re: equinox onyx

Post by Rod_Horning »

Internet issues. Hopefully file will attach.
You do not have the required permissions to view the files attached to this post.
souldude
Just started using FS
Posts: 11
Joined: December 6th, 2017, 2:02 pm
FreeStyler Version: 3.6.4
I Use FreeStyler for: DJ

Re: equinox onyx

Post by souldude »

ok many thanks will test out again and report back
:fs:
Post Reply

Return to “FreeStyler Fixture Files - Help & Support”