I bought a few LED cubes that can be controlled via DMX. I got the fixture done via FC (basic RGB) but can't seem to have control over individual cubes - they all change together. There's no dip switch anywhere and they all respond to ch1-3.
Found this term "ID writer" which seems to suggest you can set an address wirelessly.
What's this ID writer and do I need to get one or is there a software solution I could use to set these addresses?
Sent from my HTC 2PS6200 using Tapatalk
ID writer needed?
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
- Starting to get to grips with FreeStyler
- Posts: 17
- Joined: May 7th, 2016, 4:05 am
- I Use FreeStyler for: Just for the Fun of it.
-
- Moderator
- Posts: 768
- Joined: November 16th, 2016, 2:24 pm
- FreeStyler Version: 4.1.6
- I Use FreeStyler for: Stage Show
Re: ID writer needed?
Cube brand and fixture name?
Please upload or provide a link to the user manual.
Also, where did you come across the term "ID writer"? Please provide a link if you can.
Please upload or provide a link to the user manual.
Also, where did you come across the term "ID writer"? Please provide a link if you can.