JbSystems Party Bar
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
dancoleman89
- Knows how to turn Lights ON
- Posts: 3
- Joined: September 2nd, 2017, 6:45 pm
- FreeStyler Version: 3.6.4
- I Use FreeStyler for: DJ
JbSystems Party Bar
Hi any tips on how to create this on the creator?
You do not have the required permissions to view the files attached to this post.
-
Rod_Horning
- Moderator
- Posts: 768
- Joined: November 16th, 2016, 2:24 pm
- FreeStyler Version: 4.1.6
- I Use FreeStyler for: Stage Show
Re: JbSystems Party Bar
For maximum DMX control I believe you will want the hardware set up in the 27 channel mode.
SEE MY FOLLOW ON POST
The reason for this suggestion is it allows use of Freestyler's color pallet for each of the Derby and Projector units. If you define only 1 27 channel fixture the color pallet can be used for only 1 of the devices. I believe it will also allow us of other features of Freestyler such as strobe.
Hope this helps
SEE MY FOLLOW ON POST
The reason for this suggestion is it allows use of Freestyler's color pallet for each of the Derby and Projector units. If you define only 1 27 channel fixture the color pallet can be used for only 1 of the devices. I believe it will also allow us of other features of Freestyler such as strobe.
Hope this helps
Last edited by Rod_Horning on October 12th, 2017, 4:03 pm, edited 1 time in total.
-
Rod_Horning
- Moderator
- Posts: 768
- Joined: November 16th, 2016, 2:24 pm
- FreeStyler Version: 4.1.6
- I Use FreeStyler for: Stage Show
Re: JbSystems Party Bar
Ugh. Been away from this to long. Here is the better way.
Do set up the hardware in 27 channel mode.
Define a fixture for the RGB Derby - 5 channels
Define a fixture for the RGB Projector - 5 channels
Define a fixture for the Laser - 3 channels
Define a fixture for the White Flash LED - 4 channels
Set the hardware to the desired starting address
Add the first Derby to Freestyler setting the starting address to the hardware starting address
Add the first Projector to Freestyler setting the starting address to 5 above the hardware starting address (ex. if the hardware starting address is 11 then set the Freestyler starting address to 16)
Add the second Projector to Freestyler setting the starting address to 10 above the hardware starting address (ex. if the hardware starting address is 11 then set the Freestyler starting address to 21)
Add the second Derby to Freestyler setting the starting address to 15 above the hardware starting address (ex. if the hardware starting address is 11 then set the Freestyler starting address to 26)
Add the Laser to Freestyler setting the starting address to 20 above the hardware starting address (ex. if the hardware starting address is 11 then set the Freestyler starting address to 31
Add the White Flash LED to Fresstyler setting the starting address to 23 above the hardware starting address (ex. if the hardware starting address is 11 then set the Freestyler starting address to 34)
Do set up the hardware in 27 channel mode.
Define a fixture for the RGB Derby - 5 channels
Define a fixture for the RGB Projector - 5 channels
Define a fixture for the Laser - 3 channels
Define a fixture for the White Flash LED - 4 channels
Set the hardware to the desired starting address
Add the first Derby to Freestyler setting the starting address to the hardware starting address
Add the first Projector to Freestyler setting the starting address to 5 above the hardware starting address (ex. if the hardware starting address is 11 then set the Freestyler starting address to 16)
Add the second Projector to Freestyler setting the starting address to 10 above the hardware starting address (ex. if the hardware starting address is 11 then set the Freestyler starting address to 21)
Add the second Derby to Freestyler setting the starting address to 15 above the hardware starting address (ex. if the hardware starting address is 11 then set the Freestyler starting address to 26)
Add the Laser to Freestyler setting the starting address to 20 above the hardware starting address (ex. if the hardware starting address is 11 then set the Freestyler starting address to 31
Add the White Flash LED to Fresstyler setting the starting address to 23 above the hardware starting address (ex. if the hardware starting address is 11 then set the Freestyler starting address to 34)