Hi there,
I am trying to adapt a fixture file I downloaded from the FS-web to control my Martin Roboscan Pro 518 fixtures. After some redesigning it works fine, but still I have some smaller problems that I could not solve so far:
1: the Robo 518 has a remote lamp-shutdown option, which works fine with the standard martin-controller, but not in FS. Any Idea what could be the reason? I should set the values for color to UV pass, and the effects wheel on the correction filter and hold these values for 3 seconds. I tried with a macro, FS counts down 3 secs, but the lamps don't shut down.
2: open/close shutter works fine, but once I am in Strobe mode the shutter cannot be set back to open/close with the 2 shutter buttons. By moving the shutter slider I can go back to open.
All the rest works OK, I programmed all half-colors as well instead of full colors only. If anybody needs the fixture file I will upload it as soon as everything works OK.
BY the way: I just ran my first FS-show this weekend and it was a lot of fun!
problem with Martin Roboscan Pro 518
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
- Knows how to turn Lights ON
- Posts: 2
- Joined: January 28th, 2008, 10:39 am
- djSupport
- Hosts the Freestyler Forum and is an Admin!
- Posts: 1901
- Joined: July 9th, 2007, 6:57 pm
- FreeStyler Version: Forum la
- I Use FreeStyler for: Just for the Fun of it.
- Contact:
Re: problem with Martin Roboscan Pro 518
first one, setup an override button as a flash button with a sequence that does what you just described then click and hold the button for 3 secs or more and see if that helps.
second dunno... try a bug report
[bugreporting][/bugreporting]
and hell ya fs is fun when u have or can afford lights to play with lol
second dunno... try a bug report
[bugreporting][/bugreporting]
and hell ya fs is fun when u have or can afford lights to play with lol
Heather Trott, You Babe! I Drive a Dacia Duster and Explore! Check it out