Hi,
I'm trying to create a fixture for the above mentioned wash, but got stuck. Don't know where to put the "Color macro", "Beam", "Pan/Tilt fine" and "Control" channels. If someone can help and tell me this it would be great, or even better if someone can make the fixture.
Below is included the channel list (not the best possible picture because of the limitations of the site).
Thank you for any help.
ProLights XP 575 Wash Fixture help
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
nkwai
- Just started using FS
- Posts: 11
- Joined: July 12th, 2007, 3:12 am
- FreeStyler Version: 2.95f
ProLights XP 575 Wash Fixture help
You do not have the required permissions to view the files attached to this post.
-
nkwai
- Just started using FS
- Posts: 11
- Joined: July 12th, 2007, 3:12 am
- FreeStyler Version: 2.95f
Re: ProLights XP 575 Wash Fixture help
Thank you for your help
You do not have the required permissions to view the files attached to this post.
-
djSupport
- Hosts the Freestyler Forum and is an Admin!
- Posts: 1901
- Joined: July 9th, 2007, 6:57 pm
- FreeStyler Version: Forum la
- I Use FreeStyler for: Just for the Fun of it.
- Contact:
Re: ProLights XP 575 Wash Fixture help
np i'll look into it but if anyone wants to jump in b4 me then please do cause im off to bed its 5:15am and ive been up all night!
Heather Trott, You Babe! I Drive a Dacia Duster and Explore! Check it out
-
nkwai
- Just started using FS
- Posts: 11
- Joined: July 12th, 2007, 3:12 am
- FreeStyler Version: 2.95f
Re: ProLights XP 575 Wash Fixture help
take your time, there is no hurry 
-
djSupport
- Hosts the Freestyler Forum and is an Admin!
- Posts: 1901
- Joined: July 9th, 2007, 6:57 pm
- FreeStyler Version: Forum la
- I Use FreeStyler for: Just for the Fun of it.
- Contact:
Re: ProLights XP 575 Wash Fixture help
Colour Macros are on the 2nd Colorwheel
Fine Pan is the 16Bit in english lol so that was already setup properly
Beam is the frost channel use the frost slider or use the right hand slide out levels.
Cant upload at moment Fixture Creator wont export fixture!
Fine Pan is the 16Bit in english lol so that was already setup properly
Beam is the frost channel use the frost slider or use the right hand slide out levels.
Cant upload at moment Fixture Creator wont export fixture!
Heather Trott, You Babe! I Drive a Dacia Duster and Explore! Check it out
-
nkwai
- Just started using FS
- Posts: 11
- Joined: July 12th, 2007, 3:12 am
- FreeStyler Version: 2.95f
Re: ProLights XP 575 Wash Fixture help
OK, thank you for your help, today I've took one wash home to find the correct colors for macro, when I'll finish the fixture, I'll post it in the user created fixtures forum in case someone else will need it.
-
djSupport
- Hosts the Freestyler Forum and is an Admin!
- Posts: 1901
- Joined: July 9th, 2007, 6:57 pm
- FreeStyler Version: Forum la
- I Use FreeStyler for: Just for the Fun of it.
- Contact:
Re: ProLights XP 575 Wash Fixture help
No worries!
Heather Trott, You Babe! I Drive a Dacia Duster and Explore! Check it out