Hi,
ist there a fixture for the Eurolite PAR65 RGB LED-Spot?
It has 5 Channels R-G-B-Stobe-Dimmer
Sorry but i have postet that before in the wrong section.
Greetings Kai-Uwe
Eurolite PAR 64 LED RGB
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
Kai-Uwe
- DJ
- Posts: 43
- Joined: July 12th, 2007, 1:04 pm
- FreeStyler Version: 3.2.1
- I Use FreeStyler for: Nightclub Lighting
- Twitter: twitter.com/
- Contact:
-
djSupport
- Hosts the Freestyler Forum and is an Admin!
- Posts: 1902
- Joined: July 9th, 2007, 6:57 pm
- FreeStyler Version: Forum la
- I Use FreeStyler for: Just for the Fun of it.
- Contact:
Re: Eurolite PAR 64 LED RGB
thats very easy to make have a go and just see if you can do it ( HINT: fil out manufacturer, fixture name, pick a picture then put 5 channel fixture then click enable RGB put 1,2,3 or what evers what then fill out strobe and intensity(dimmer) channel settings then save and your off!!)
Heather Trott, You Babe! I Drive a Dacia Duster and Explore! Check it out
-
JCNGG
- Knows how to turn Lights ON
- Posts: 3
- Joined: September 19th, 2007, 7:08 pm
- FreeStyler Version: 2.95f
Re: Eurolite PAR 64 LED RGB
Hello, I have the exact same issue as the original poster.
I have 4 Eurolite LED 64 RGB.
I don't know how to properly configure the fixture, so if anyone has the right file, I'd appreciate it.
I've tried several combinations of values in the fixture creator, but it just won't respond.
Help much appreciated.
I have 4 Eurolite LED 64 RGB.
I don't know how to properly configure the fixture, so if anyone has the right file, I'd appreciate it.
I've tried several combinations of values in the fixture creator, but it just won't respond.
Help much appreciated.
-
djSupport
- Hosts the Freestyler Forum and is an Admin!
- Posts: 1902
- Joined: July 9th, 2007, 6:57 pm
- FreeStyler Version: Forum la
- I Use FreeStyler for: Just for the Fun of it.
- Contact:
Re: Eurolite PAR 64 LED RGB
put in the total channels 4 then click down bottom left corner enable cmy/rgb then click rgb values enter in the channel information
then in the intensity channel just put the 4th channel in that then fill out fixture details above save then it should work allakzam!!
then in the intensity channel just put the 4th channel in that then fill out fixture details above save then it should work allakzam!!
Heather Trott, You Babe! I Drive a Dacia Duster and Explore! Check it out
-
JCNGG
- Knows how to turn Lights ON
- Posts: 3
- Joined: September 19th, 2007, 7:08 pm
- FreeStyler Version: 2.95f
Re: Eurolite PAR 64 LED RGB
Mmmm..
I have just tried this, severeal times, but still no light is comming out of my LED spots,
But they work just fine when they are on light-2-sound.
Any idea of where it goes wrong?
PC --> DMX = OK
DMX --> lamp cable = OK
Lamp, just been shipped to me by Thomann.de, and are working just fine..
Thanks a lot for the help people!
I have just tried this, severeal times, but still no light is comming out of my LED spots,
But they work just fine when they are on light-2-sound.
Any idea of where it goes wrong?
PC --> DMX = OK
DMX --> lamp cable = OK
Lamp, just been shipped to me by Thomann.de, and are working just fine..
Thanks a lot for the help people!
-
JCNGG
- Knows how to turn Lights ON
- Posts: 3
- Joined: September 19th, 2007, 7:08 pm
- FreeStyler Version: 2.95f
Re: Eurolite PAR 64 LED RGB
Hey guys, just wanted to say that I got it all working now, and will be uploading the fixture to the new forum 
-
djSupport
- Hosts the Freestyler Forum and is an Admin!
- Posts: 1902
- Joined: July 9th, 2007, 6:57 pm
- FreeStyler Version: Forum la
- I Use FreeStyler for: Just for the Fun of it.
- Contact:
Re: Eurolite PAR 64 LED RGB
can you explain what you did wrong? for the community and our knowledge? cheers...
Heather Trott, You Babe! I Drive a Dacia Duster and Explore! Check it out
-
So Rich
- Knows how to turn Lights ON
- Posts: 6
- Joined: December 22nd, 2007, 12:33 pm
- FreeStyler Version: HIPPY
Re: Eurolite PAR 64 LED RGB
Hello, i met the same problem: nothing works... Anybody could send me a print screen of the fixture creator page for the cells to fill please? i properly follow the instructions but nothing is working . Help me please
thanks a lot
thanks a lot
-
So Rich
- Knows how to turn Lights ON
- Posts: 6
- Joined: December 22nd, 2007, 12:33 pm
- FreeStyler Version: HIPPY
Re: Eurolite PAR 64 LED RGB
Hello again, that's good, i found the solution for this device 
So, (for you and the knowledge) you make the good adress behind the spot and you select the "dip" 10 , i try for one spot in this moment and i'll try for 4 spot
I'll keep you in touch!!
thanks a lot
So Rich, enjoy
So, (for you and the knowledge) you make the good adress behind the spot and you select the "dip" 10 , i try for one spot in this moment and i'll try for 4 spot
I'll keep you in touch!!
thanks a lot
So Rich, enjoy
-
djmattd
- Just started using FS
- Posts: 12
- Joined: December 14th, 2007, 1:29 pm
- FreeStyler Version: 2.96j
- I Use FreeStyler for: Just for the Fun of it.
Re: Eurolite PAR 64 LED RGB
So in conclusion, did anyone make a fixture file for the Eurolite LED 64 can??? Need one asap and I can't seem to get it to work using the fixture creator, thanks in advance.