i cannot figure out how to get a fixture file for this laser can someone help me out please?
here is the info from the manual
Fixture for LD LD-488C Laser quad apperture: green, red, yellow, violet
7 channels:
ch 1-mode-
0~49- close, laser off
50~99-static patterns of dmx
100~199-dynamic patterns of dmx
150~199-sound active
200~255-auto mode
ch 2-pattern selection-
0~255- 52 static/dynamic patterns
ch 3-position-x-
0~255-adjust position x
ch 4-position Y-
0~255-adjust position Y
ch 5-scanning speed-
0~255- 0 is speedy,255 slow
ch 6-dynamic patterns play speed-
0~255- 0 is speedy,255 slow,10 grade speed
ch 7-static patterns size-
0~255- 0 is small 255 big
LD-488C 4 head laser
Forum rules
A place for you to request fixture files to be created by other users - PLEASE BE WARNED THIS MAY NEVER HAPPEN AS WE ENCOURAGE YOU TO TRY YOURSELF AND WILL GIVE PROMPTS as and when we can. at the END OF THE DAY Creating fixtures isn't easy if we don't have that particular light and an appropriate manual! BE WARNED!
IF YOU HAVE HAD A REQUEST FULFILLED PLEASE MARK THE TOPIC AS SOLVED!
You can now pay for fixtures if you don't want to wait or create your own by going to here http://www.freestylersupport.com/wiki/f ... on_service
A place for you to request fixture files to be created by other users - PLEASE BE WARNED THIS MAY NEVER HAPPEN AS WE ENCOURAGE YOU TO TRY YOURSELF AND WILL GIVE PROMPTS as and when we can. at the END OF THE DAY Creating fixtures isn't easy if we don't have that particular light and an appropriate manual! BE WARNED!
IF YOU HAVE HAD A REQUEST FULFILLED PLEASE MARK THE TOPIC AS SOLVED!
You can now pay for fixtures if you don't want to wait or create your own by going to here http://www.freestylersupport.com/wiki/f ... on_service
-
- Knows how to turn Lights ON
- Posts: 2
- Joined: October 12th, 2017, 1:00 am
- I Use FreeStyler for: DJ
-
- Moderator
- Posts: 768
- Joined: November 16th, 2016, 2:24 pm
- FreeStyler Version: 4.1.6
- I Use FreeStyler for: Stage Show
Re: LD-488C 4 head laser
Give this a try. I've never configured a laser before so feedback would really be appreciated.
Notes:
The Pan/Tilt window will control the Position X and Position Y adjustments. Not sure this is correct.
There are also a couple of custom sliders to help with Channel 1
Notes:
The Pan/Tilt window will control the Position X and Position Y adjustments. Not sure this is correct.
There are also a couple of custom sliders to help with Channel 1
You do not have the required permissions to view the files attached to this post.
-
- Knows how to turn Lights ON
- Posts: 2
- Joined: October 12th, 2017, 1:00 am
- I Use FreeStyler for: DJ
Re: LD-488C 4 head laser
Thanks I will give it a try this evening.