The mysterious "Beam 200". It is a 5R beam moving head and is most similar (it seems) to the Elation Platinum 5R. These Beam 200 lights are everywhere at festivals and are Stage Techs go to light for mass quantity movers. I would be so forever grateful if someone would take the time to create this fixture with 16 channel mode.
USER MANUAL ATTACHED FOR REFERENCE
Can someone build fixture profile for this CHINA LIGHT? (manual attached)
Forum rules
A place for you to request fixture files to be created by other users - PLEASE BE WARNED THIS MAY NEVER HAPPEN AS WE ENCOURAGE YOU TO TRY YOURSELF AND WILL GIVE PROMPTS as and when we can. at the END OF THE DAY Creating fixtures isn't easy if we don't have that particular light and an appropriate manual! BE WARNED!
IF YOU HAVE HAD A REQUEST FULFILLED PLEASE MARK THE TOPIC AS SOLVED!
You can now pay for fixtures if you don't want to wait or create your own by going to here http://www.freestylersupport.com/wiki/f ... on_service
A place for you to request fixture files to be created by other users - PLEASE BE WARNED THIS MAY NEVER HAPPEN AS WE ENCOURAGE YOU TO TRY YOURSELF AND WILL GIVE PROMPTS as and when we can. at the END OF THE DAY Creating fixtures isn't easy if we don't have that particular light and an appropriate manual! BE WARNED!
IF YOU HAVE HAD A REQUEST FULFILLED PLEASE MARK THE TOPIC AS SOLVED!
You can now pay for fixtures if you don't want to wait or create your own by going to here http://www.freestylersupport.com/wiki/f ... on_service
-
- Just started using FS
- Posts: 10
- Joined: April 6th, 2014, 8:16 pm
- FreeStyler Version: 3.5.5
- I Use FreeStyler for: DJ
- Twitter: twitter.com/djsolstice
Can someone build fixture profile for this CHINA LIGHT? (manual attached)
You do not have the required permissions to view the files attached to this post.
-
- Just started using FS
- Posts: 10
- Joined: April 6th, 2014, 8:16 pm
- FreeStyler Version: 3.5.5
- I Use FreeStyler for: DJ
- Twitter: twitter.com/djsolstice
Re: Can someone build fixture profile for this CHINA LIGHT? (manual attached)
I will pay moneyzzzz for it!
-
- Just started using FS
- Posts: 12
- Joined: March 3rd, 2016, 2:04 am
- FreeStyler Version: 3.6.3
- I Use FreeStyler for: DJ
- Twitter: @PerezDJServices
- Contact:
Re: Can someone build fixture profile for this CHINA LIGHT? (manual attached)
I will give it a try!
-
- Just started using FS
- Posts: 12
- Joined: March 3rd, 2016, 2:04 am
- FreeStyler Version: 3.6.3
- I Use FreeStyler for: DJ
- Twitter: @PerezDJServices
- Contact:
Re: Can someone build fixture profile for this CHINA LIGHT? (manual attached)
See attached fixture. Please note that this fixture is untested.
You do not have the required permissions to view the files attached to this post.
-
- Knows how to turn Lights ON
- Posts: 2
- Joined: August 17th, 2016, 7:34 pm
- I Use FreeStyler for: DJ
Re: Can someone build fixture profile for this CHINA LIGHT? (manual attached)
Hi, very new to Freestyler.. actually only a day in.
I have a similar light to this, but it's the 230W 7R beam.
I installed this profile and it kind of works, but I cannot get the fixture to turn on.
What am I doing wrong??
I have a similar light to this, but it's the 230W 7R beam.
I installed this profile and it kind of works, but I cannot get the fixture to turn on.
What am I doing wrong??
-
- Knows how to turn Lights ON
- Posts: 2
- Joined: August 17th, 2016, 7:34 pm
- I Use FreeStyler for: DJ
Re: Can someone build fixture profile for this CHINA LIGHT? (manual attached)
My guide shows the light on at 128 and I changed that. Stil can't get the light to turn on other than the strobe effect.
- buttza
- FS is my life
- Posts: 351
- Joined: January 7th, 2010, 2:14 pm
- FreeStyler Version: 3.6.4
- I Use FreeStyler for: Stage Show
- Twitter: twitter.com/@buttza
Re: Can someone build fixture profile for this CHINA LIGHT? (manual attached)
Check the default setting on the strobe channel in the fixture file.
Make sure it is set to an OPEN Value. This might be the shutter by default too.
Make sure it is set to an OPEN Value. This might be the shutter by default too.
-
- Just started using FS
- Posts: 14
- Joined: October 28th, 2017, 5:24 pm
Re: Can someone build fixture profile for this CHINA LIGHT? (manual attached)
I posted in another section and Rod kindly helped me but I thought I would respond to this post incase others can help as well. I also have a beam 230 and certain functions do not work, if anyone else on here has a similar light please respond, I would be most grateful.