I have a CASA CTL-DCB rgb laser. There is currently no fixture profile in this software. It is DMX 512 compatible. Can anyone please help with creating a suitable profile.
Thanks
Ian
Fixture profile for CASA CTL-DCB Laser
Forum rules
A place for you to request fixture files to be created by other users - PLEASE BE WARNED THIS MAY NEVER HAPPEN AS WE ENCOURAGE YOU TO TRY YOURSELF AND WILL GIVE PROMPTS as and when we can. at the END OF THE DAY Creating fixtures isn't easy if we don't have that particular light and an appropriate manual! BE WARNED!
IF YOU HAVE HAD A REQUEST FULFILLED PLEASE MARK THE TOPIC AS SOLVED!
You can now pay for fixtures if you don't want to wait or create your own by going to here http://www.freestylersupport.com/wiki/f ... on_service
A place for you to request fixture files to be created by other users - PLEASE BE WARNED THIS MAY NEVER HAPPEN AS WE ENCOURAGE YOU TO TRY YOURSELF AND WILL GIVE PROMPTS as and when we can. at the END OF THE DAY Creating fixtures isn't easy if we don't have that particular light and an appropriate manual! BE WARNED!
IF YOU HAVE HAD A REQUEST FULFILLED PLEASE MARK THE TOPIC AS SOLVED!
You can now pay for fixtures if you don't want to wait or create your own by going to here http://www.freestylersupport.com/wiki/f ... on_service
-
IanTinney1947
- Knows how to turn Lights ON
- Posts: 1
- Joined: August 14th, 2012, 4:29 am
- FreeStyler Version: 3.4.8
-
Jdubpeace
- Knows how to turn Lights ON
- Posts: 1
- Joined: February 12th, 2018, 5:06 pm
Re: Fixture profile for CASA CTL-DCB Laser
Ya I have one too and I can't figure out how to get it set up in freestyler. Don't see any replies yet. If anybody has any help, it would be greatly appreciated!
Thanks so much
Jordan
Thanks so much
Jordan
-
Rod_Horning
- Moderator
- Posts: 768
- Joined: November 16th, 2016, 2:24 pm
- FreeStyler Version: 4.1.6
- I Use FreeStyler for: Stage Show
Re: Fixture profile for CASA CTL-DCB Laser
Is this the manual for this instrument. If it is it will take a bit of time as there are 52 patterns.
You do not have the required permissions to view the files attached to this post.