These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

Kam - LED Powerbar

Post Reply
User avatar
biggus
Starting to get to grips with FreeStyler
Posts: 29
Joined: October 4th, 2011, 2:07 pm
I Use FreeStyler for: Nightclub Lighting
Twitter: http://www.twitter.com/emrdisco

Kam - LED Powerbar

Post by biggus »

Please see attached my fixture for the Kam LED Powerbar tested with a Enttec Pro DMX.

The fixture is 15 channels, however I've split the fixture into 2.

Kam Powerbar LED Master should be setup to control the first three channels
Channel 1 – Internal Programs, Auto Mode and Sound Controlled Mode
Channel 2 – Master Dimmer
Channel 3 – Master Strobe

Kam Powerbar LED Can This fixture has 4 cans and there are 3 channels each so you will need to add this fixture in 4 times once for each can, The reason I decided to septate the fixture up is so its easier to vision what is happening with each LED can.

Can 1
Channel 4 - Red
Channel 5 - Green
Channel 6 - Blue

Can 2
Channel 7 - Red
Channel 8 - Green
Channel 9 - Blue

Can 3
Channel 10 - Red
Channel 11 - Green
Channel 12 - Blue

Can 4
Channel 13 - Red
Channel 14 - Green
Channel 15 - Blue
You do not have the required permissions to view the files attached to this post.


User avatar
biggus
Starting to get to grips with FreeStyler
Posts: 29
Joined: October 4th, 2011, 2:07 pm
I Use FreeStyler for: Nightclub Lighting
Twitter: http://www.twitter.com/emrdisco

Re: Kam - LED Powerbar

Post by biggus »

Fixture file attached
You do not have the required permissions to view the files attached to this post.
Post Reply

Return to “Generic”