Page 1 of 1

jb systems Cob 4 Bar

Posted: July 6th, 2015, 9:39 pm
by clubfiesta
Hello,
I bought 1 month ago 2 cob4bar's, i dind't find good fixture files for this light on internet, so i made them myself. i followed the manual. in de file are following dmx channels possible:

3 channel mode: all led projectors the same collor when collor mixing
5 channel mode: all led projectors same collor / extra poer 1 & 2 controllable
6 channel mode: 2 by 2 projectors collor mixing ( led par 1&2 uses channel 1 2 3 / led par 3&4 uses channel 456)
8 channel mode: master dimmer / strobe / auto collor fades / rgb mixing all par's at the same time / extra power outputs controllable
12 channel mode: rgb collor mixing for each par individually
17 channel mode: macro's & auto collor mode, rgb collor mixing for each par individually , extra power outputs dmx controllable.

these files are tested en are working.
(this was the first time i made a fixture file)

Re: jb systems Cob 4 Bar

Posted: July 9th, 2015, 10:31 pm
by Nathanrs93
You need export the file, so you can upload it in .pff format. Otherwise the file doesn't work correctly. :)

Re: jb systems Cob 4 Bar

Posted: July 28th, 2015, 10:44 am
by clubfiesta
the file is changed, i exported the fictures now it should be working

Re: jb systems Cob 4 Bar

Posted: January 5th, 2016, 1:42 am
by djchrizz
Thnx for the files,

1 thing is not right.
The strobe function is not fast.
I know the cob's has a faster strobe function.
Can you adjust it?

Thnx