These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

Showtec lightfoot 4 no go ???

Post Reply
blue slate mike
Knows how to turn Lights ON
Posts: 1
Joined: May 26th, 2011, 7:16 pm
I Use FreeStyler for: Church

Showtec lightfoot 4 no go ???

Post by blue slate mike »

I have a showtec lightfoot4 DMX and It doesn't willn't to work with a starville led cans. Will this unit only work showtec cans?? The lights work with my controller and a enttec Open DMX USB Interface ?

mike d


ug999
Knows how to turn Lights ON
Posts: 4
Joined: March 1st, 2012, 9:53 am
I Use FreeStyler for: Church

Re: Showtec lightfoot 4 no go ???

Post by ug999 »

hi,
late answer, but perhaps it helps somebody.

it'll work, but with a lot of restrictions:
as the controller is made to control a max. of 4 par cans (single color), all programs and chases will not work!
You can only use the scene mode.

Set the cans to channel 1 (so the controlled channels will be 1-4) (dip1 on, rest off).
ch. 2-4 will control the colors (0-255)
ch. 1 must be set to 0 in order to have rgb control for ch. 2-4

Now you can programm any colored scene and blackout as you like.
bloodandtears
Knows how to turn Lights ON
Posts: 1
Joined: November 26th, 2012, 9:22 am
I Use FreeStyler for: Church

Re: Showtec lightfoot 4 no go ???

Post by bloodandtears »

Sorry for the necro post, but I have the same setup as the OP but I cannot make this work at all.. please help..
Post Reply

Return to “Showtec”