Hi all,
I'm currently running a QTX MHS-30 mini moving head (please find attached the manual). Its 8 channel and I've attempted to create my own fixture for it. All gone well except from when I Pan ( not happening when tilting ) and I'm on the Open gobo (Ch3 000-011) the gobos start changing on their own. It cycles through all the gobos and then returns to the spot. This does not happen for any other gobo just this one!
Please also find attached my fixture for this light and a video of my problem.
Any help would be greatly appreciated as it is really bugging me.
Many thanks
Mateusz
https://drive.google.com/file/d/1LI1be8 ... sp=sharing
Moving head Gobo/Pan Issue
Forum rules
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
-
- Knows how to turn Lights ON
- Posts: 2
- Joined: November 12th, 2020, 2:39 pm
- FreeStyler Version: 4.0
- I Use FreeStyler for: DJ
Moving head Gobo/Pan Issue
You do not have the required permissions to view the files attached to this post.
-
- Just started using FS
- Posts: 14
- Joined: March 31st, 2015, 7:50 am
- FreeStyler Version: 4.1.0
- I Use FreeStyler for: DJ
Re: Moving head Gobo/Pan Issue
Do you have more of this fixtures?
If so, put them on the same address and make a test.
If only this one is doing that, check cables inside and position of gobo hall sensor. Sometimes bad position or short circuit of hall sensor is doing this.
If all of them are behaving the same, check the DMX output values in the "Show output" window.
If so, put them on the same address and make a test.
If only this one is doing that, check cables inside and position of gobo hall sensor. Sometimes bad position or short circuit of hall sensor is doing this.
If all of them are behaving the same, check the DMX output values in the "Show output" window.