Hi, i do get this message when working with freestyler and midi-controllers.
"Couldn't open midi out, rc =..."
This occurs when i start freestyler after starting Virtualdj.
How to solve this problem?
Couldn't open midi out, rc =...
Forum rules
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
-
- Starting to get to grips with FreeStyler
- Posts: 22
- Joined: September 28th, 2007, 4:33 pm
-
- FS is my life
- Posts: 772
- Joined: July 11th, 2007, 8:39 pm
- FreeStyler Version: 4.01
- I Use FreeStyler for: Nightclub Lighting
- Twitter: twitter.com/
- Contact:
Re: Couldn't open midi out, rc =...
It is looking for a midi device that was once connected or selected. Go into:
Freestyler setup
External Control
Midi Devices
Make sure they are set to "no input" and "no output" for both slots
hit save
close and restart Freestyler
problem should be solved
Freestyler setup
External Control
Midi Devices
Make sure they are set to "no input" and "no output" for both slots
hit save
close and restart Freestyler
problem should be solved
-
- Has mastered Fixture Creator
- Posts: 33
- Joined: June 23rd, 2017, 8:10 am
- FreeStyler Version: 3.6.49
- I Use FreeStyler for: DJ
Re: Couldn't open midi out, rc =...
Also inside VirtualDJ you can select a MIDI device and choose "Ignore"
This way VirtualDJ won't occupy the device and it will leave it free for Freestyler to connect
This way VirtualDJ won't occupy the device and it will leave it free for Freestyler to connect