These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

Output testing on FTDI232?

Questions and discussions regarding FreeStyler Software.
Forum rules
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
Post Reply
twinturbo
Knows how to turn Lights ON
Posts: 1
Joined: April 23rd, 2019, 7:05 am

Output testing on FTDI232?

Post by twinturbo »

Dear All.

I may be missing soemthing but I can't get an FTDI232 to output to a basic RGB Par,

Windows has detected and installed USB-Serial on COM3..
In FS setup I select Entec Open DMX, and it shows FTDI232.

We create a basic 3 Ch fixture, correctly addressed.

On the fixture we set the output levels (not sure this step is right ) using the little set of sliders shown to the right of the screen..

Is there something else we need to do.


(The interface works fine on QLC, so it's not a hardware issue)

Cheers

Rob


Jackson75
Has mastered Fixture Creator
Posts: 31
Joined: November 3rd, 2017, 6:09 pm
FreeStyler Version: 3.643
I Use FreeStyler for: DJ

Re: Output testing on FTDI232?

Post by Jackson75 »

Does the 'show output' window in FS actually show DMX values going out ?
Post Reply

Return to “FreeStyler Software”